Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type) › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019701 NAVIGATION / MULTI INFO DISPLAY _0104171 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the navigation receiver assembly via this circuit.

The sound signal that has been sent is amplified by the navigation receiver assembly and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the navigation receiver assembly or speakers.

WIRING DIAGRAM

E277819E76
0.844,0.635 1.458,0.833 0.615,0.198 10 false AUXO 0.938,1.833 1.552,2.031 0.615,0.198 10 false ALO 0.823,2.427 1.281,2.615 0.458,0.188 10 false ASGN 0.833,3.01 1.448,3.208 0.615,0.198 10 false AGND 0.917,1.229 1.531,1.427 0.615,0.198 10 false ARO 1.333,0.521 1.948,0.719 0.615,0.198 10 false 9 1.333,1.104 1.948,1.302 0.615,0.198 10 false 6 1.333,1.698 1.948,1.896 0.615,0.198 10 false 7 1.333,2.281 1.948,2.479 0.615,0.198 10 false 8 1.323,2.885 1.938,3.083 0.615,0.198 10 false 10 3.271,2.813 3.948,3.01 0.677,0.198 10 false (Shielded) 5.948,0.635 6.563,0.833 0.615,0.198 10 false ADPG 5.958,1.229 6.573,1.427 0.615,0.198 10 false VAR+ 5.958,1.813 6.573,2.01 0.615,0.198 10 false VAL+ 5.958,2.417 6.573,2.615 0.615,0.198 10 false VA- 5.958,3.01 6.573,3.208 0.615,0.198 10 false AGND 5.708,0.531 6.323,0.729 0.615,0.198 10 false 25 5.708,1.115 6.323,1.313 0.615,0.198 10 false 26 5.719,1.708 6.333,1.906 0.615,0.198 10 false 28 5.719,2.313 6.333,2.51 0.615,0.198 10 false 27 5.708,2.896 6.323,3.094 0.615,0.198 10 false 11 0.073,3.458 0.688,3.656 0.615,0.198 10 false F125 0.063,3.635 2.438,3.885 2.375,0.25 10 false No. 1 Stereo Jack Adapter Assembly 5.844,3.458 6.458,3.656 0.615,0.198 10 false F116 5.844,3.635 7.042,4.021 1.198,0.385 10 false Navigation Receiver Assembly

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the F116 navigation receiver assembly connector.


b.

Disconnect the F125 No. 1 stereo jack adapter assembly connector.


c.
E227392C36
1.5,0.219 1.958,0.5 0.458,0.281 1.5,2.271 1.958,2.552 0.458,0.281 2.104,1.458 2.781,1.177 false 2.208,1.604 2.073,1.958 false 2.104,1.604 1.594,1.958 false 2.438,1.604 2.969,1.958 false 2.323,1.604 2.479,1.958 false 1.573,3.823 1.323,4.146 false 1.844,3.823 2.021,4.156 false 1.99,3.823 2.313,3.823 false 1.427,3.833 1.135,3.833 false 1.708,3.813 1.708,4.198 false 2.823,1.083 3.25,1.229 0.427,0.146 10 false AGND 1.813,1.979 2.323,2.365 0.51,0.385 10 false VAR+ 1.156,1.885 1.719,2.167 0.563,0.281 10 false ADPG 2.885,1.979 3.25,2.125 0.365,0.146 10 false VAL+ 2.417,1.979 2.667,2.125 0.25,0.146 10 false VA- 0.177,0.167 0.604,0.771 0.427,0.604 10 false *a 1.583,0.281 2.052,0.531 0.469,0.25 10 false F116 2.365,3.74 2.792,3.917 0.427,0.177 10 false AGND 0.958,4.135 1.354,4.313 0.396,0.177 10 false ALO 2.021,4.177 2.469,4.365 0.448,0.188 10 false AUXO 0.177,2.229 0.563,2.542 0.385,0.313 10 false *b 0.802,3.75 1.24,3.927 0.438,0.177 10 false ARO 1.521,4.229 2.01,4.427 0.49,0.198 10 false ASGN 1.583,2.333 2.083,2.594 0.5,0.26 10 false F125
*a Front view of wire harness connector
(to Navigation Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F116-25 (ADPG) - F125-9 (AUXO) Always Below 1 Ω
F116-11 (AGND) - F125-10 (AGND) Always Below 1 Ω
F116-26 (VAR+) - F125-6 (ARO) Always Below 1 Ω
F116-28 (VAL+) - F125-7 (ALO) Always Below 1 Ω
F116-27 (VA-) - F125-8 (ASGN) Always Below 1 Ω
F116-25 (ADPG) - Body ground Always 10 kΩ or higher
F116-11 (AGND) - Body ground Always 10 kΩ or higher
F116-26 (VAR+) - Body ground Always 10 kΩ or higher
F116-28 (VAL+) - Body ground Always 10 kΩ or higher
F116-27 (VA-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR