Home › Engine / Hybrid System › CRUISE CONTROL › FORWARD RECOGNITION CAMERA SYSTEM › from 2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0296068 FORWARD RECOGNITION CAMERA SYSTEM D

CRUISE CONTROL  FORWARD RECOGNITION CAMERA SYSTEM  UTILITY  


NOTICE:
·

If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera adjustment. If the system is turned on without performing forward recognition camera adjustment, DTC C1AA9 will be stored.

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the forward recognition camera system may not operate properly due to a difference in the transmissivity or black ceramic border.



Recognition Camera/Target Position Memory


HINT:

Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.


a.

Perform Recognition Camera Axis Adjust according to the display on the GTS.

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)

Chassis > Front Recognition Camera > Utility
Tester Display
Recognition Camera/Target Position Memory
50005 386 2394


Recognition Camera Axis Adjust


HINT:

Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.


a.

Perform Recognition Camera Axis Adjust according to the display on the GTS.

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)

Chassis > Front Recognition Camera > Utility
Tester Display
Recognition Camera Axis Adjust
50005 386 4409


History Clear


HINT:

History Clear is used to clear the history of Data List items Blockage, Low Temperature, or High Temperature.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / Front Recognition Camera / Utility / History Clear.


e.

Perform History Clear according to the display on the GTS.

Chassis > Front Recognition Camera > Utility
Tester Display
History Clear
50005 386 4364