Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2016.11
RM3160E _58 Vehicle Interior _060169 PRE-COLLISION _0296083 PRE-COLLISION SYSTEM D

PRE-COLLISION  PRE-COLLISION SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE PRE-COLLISION SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Make a note of the current settings before customizing.



HINT:

The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.


a.

Customizing with the GTS

i.

Turn the engine switch off.


ii.

Connect the GTS to the DLC3.


iii.

Turn the engine switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Customize Setting / Others.


vi.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
PCS Operation State Retention Setting Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 1 Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 2 Refer to the table below ON 0:OFF,1:ON Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 3 Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
50006 98
Customize Setting Description Setting
PCS Operation State Retention Setting Function to maintain the pre-collision system on/off setting when the engine switch is turned off and then on (IG). OFF: Not maintained (Pre-collision system always turns on)
ON: Maintained
PCS Alarm Activation Distance Retention Setting 1 Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on. OFF: Not maintained (Setting changes to "Mid")
ON: Maintained
PCS Alarm Activation Distance Retention Setting 2 Function to maintain the sensitivity setting of the pre-collision system when the engine switch is turned off while the pre-collision system is on. OFF: Not maintained (Setting changes to "Mid")
ON: Maintained
PCS Alarm Activation Distance Retention Setting 3 Function to maintain the sensitivity setting of the pre-collision system when the engine switch is turned off while the pre-collision system is off. OFF: Not maintained (Setting changes to "Mid")
ON: Maintained