Home › Engine / Hybrid System › CRUISE CONTROL › CAMERA HEATER › from 2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0303334 CAMERA HEATER A

CRUISE CONTROL  CAMERA HEATER  INSTALLATION  


PROCEDURE

Hide 86401 1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
·

Do not apply force to the heater area as the heater may become damaged.

·

Do not forcibly pull the wire harness as it may become damaged.



a.
E361062C01
0,0 0,0 false
V100155

Heater Area


Engage the 2 guides and 2 claws as shown in the illustration.

NOTICE:

Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.



b.
E361060N01
0.344,0.115 0.583,0.354 0.24,0.24 10 false 1 0.854,0.042 1.063,0.25 0.208,0.208 10 false 2 1.938,0.073 2.156,0.281 0.219,0.208 10 true 3 2.344,0.365 2.552,0.573 0.208,0.208 10 false 4 2.479,0.542 2.688,0.75 0.208,0.208 10 false 5 2.646,0.75 2.833,0.969 0.188,0.219 10 false 6 2.781,0.948 2.969,1.156 0.188,0.208 10 false 7 2.854,1.417 3.031,1.615 0.177,0.198 10 true 8

Engage the 8 clamps to install the forward recognition with heater hood sub-assembly.

NOTICE:

As the No. 1 forward recognition cover cannot be installed correctly if the clamps are not engaged securely, make sure to engage each clamp securely.


HINT:

Engage the clamps in the order shown in the illustration.



Hide 8646C 2.INSTALL FORWARD RECOGNITION CAMERA