Home › Engine / Hybrid System › 2GR-FKS STARTING › STARTER › from 2016.11
RM3160E _51 Engine / Hybrid System _060163 2GR-FKS STARTING _0300110 STARTER A

2GR-FKS STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28226B 1.REMOVE REPAIR SERVICE STARTER KIT

a.
A079718

Remove the nut and disconnect the field coil lead wire from terminal C.


b.
A079719

While holding the magnet switch to the starter drive housing assembly, remove the 2 screws.


c.

Remove the magnet switch from the starter drive housing assembly.


d.

Remove the return spring and plunger from the magnet switch.


Hide 28120 2.REMOVE STARTER YOKE ASSEMBLY

a.
A079720C02
1.729,0.771 2.083,0.25 2.083,0.25 2.406,0.25 false 2.292,1.552 2.781,1.552 false 2.469,0.167 2.781,0.323 0.313,0.156 10 false *1 2.823,1.458 3.135,1.615 0.313,0.156 10 false *2
*1 Starter Yoke Assembly
*2 Starter Commutator End Frame Assembly


Remove the 2 through bolts and pull out the starter yoke assembly together with the starter commutator end frame assembly.


Hide 28130 3.REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY

a.
A079721C01
1.292,0.313 1.594,0.135 1.594,0.135 1.823,0.135 false 2.333,1.625 3.052,1.625 false 1.875,0.063 2.188,0.219 0.313,0.156 10 false *1 3.115,1.542 3.427,1.698 0.313,0.156 10 false *2
*1 Starter Yoke Assembly
*2 Starter Commutator End Frame Assembly


Remove the starter commutator end frame assembly from the starter yoke assembly.


Hide 28177 4.REMOVE STARTER ARMATURE PLATE

a.
A284247C01
0.396,1.146 1.083,1.146 true 0.781,0.146 1.073,0.146 1.073,0.146 1.521,0.344 true 0.583,0.063 0.896,0.219 0.313,0.156 10 false *1 0.24,1.073 0.552,1.229 0.313,0.156 10 false *2
*1 Starter Yoke Assembly
*2 Starter Armature Plate


Remove the starter armature plate from the starter yoke assembly.


Hide 28132A 5.REMOVE STARTER COMMUTATOR END FRAME COVER

a.
A295761

Using a screwdriver, pry out the starter commutator end frame cover from the starter commutator end frame assembly.


Hide 28160 6.REMOVE STARTER ARMATURE ASSEMBLY

a.
A295762C05
1.552,0.646 1.281,0.646 false 1.115,0.563 1.427,0.719 0.313,0.156 10 false *a
*a Snap Ring Pliers


Secure the starter commutator end frame assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using snap ring pliers, remove the snap ring and washer.

NOTICE:

Do not drop the starter armature assembly.



c.

Remove the starter armature assembly from the starter commutator end frame assembly.


Hide 7.REMOVE PLANETARY GEAR

a.
A081167

Remove the 3 planetary gears from the starter drive housing assembly.