Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE › from 2016.11
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109636 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  REMOVAL  


PROCEDURE

Hide 53299D 1.REMOVE RADIATOR SIDE DEFLECTOR SEAL LH

a.
B461167

Remove the 2 clips and radiator side deflector seal LH.


Hide 53298E 2.REMOVE RADIATOR SIDE SEAL RH

a.
B461168

Remove the 2 clips and radiator side seal RH.


Hide 53295E 3.REMOVE COOL AIR INTAKE DUCT SEAL

a.
B461169

Remove the 7 clips and cool air intake duct seal.


Hide 4.REMOVE RADIATOR GRILLE ASSEMBLY

a.

Disconnect the connector.


b.

Disengage the clamp.


c.
B461170C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the radiator grille assembly as shown in the illustration.


d.
B461171

Remove the 6 clips.


e.
B461172

Disengage the 8 claws and remove the radiator grille assembly as shown in the illustration.


Hide 88211B 5.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Toyota Safety Sense)

Hide 75311 6.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

a.
B461177C01
0.563,0.26 0.823,0.427 false 1.156,2.156 1.417,2.323 true 0.396,0.156 0.708,0.313 0.313,0.156 10 false *a 1.458,2.25 1.656,2.417 0.198,0.167 10 true *b
*a Spring Nut
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, pull out the 2 spring nuts as shown in the illustration.


b.
B461176C01
1.865,1.094 2.229,0.823 false 2.271,0.75 2.583,0.906 0.313,0.156 10 false *a
*a Cut


Using a plier nipper (side cutters), cut the 2 spring nuts at the positions shown in the illustration and remove them.


c.
B461174

Disengage the 2 claws and 2 guides as shown in the illustration to remove the radiator grille (or front panel) emblem.