Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2016.11
RM3160E _58 Vehicle Interior _019705 DOOR LOCK _0098499 POWER DOOR LOCK CONTROL SYSTEM L

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Lane Departure Alert System (w/ Steering Control) (Click here)
Parking Assist Monitor System
Panoramic View Monitor System
Power Door Lock Control System
Pre-collision System
Air Conditioning System (for Automatic Air Conditioning System)
Air Conditioning System (for Manual Air Conditioning System)
Power Back Door System



IGNITION SWITCH EXPRESSIONS


a.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)



PRECAUTIONS FOR INSPECTING POWER SOURCE FOR MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (for LHD)


a.

As the door control battery is installed between the vehicle battery and main body ECU (multiplex network body ECU), a door control battery malfunction can be suspected if the power source for the main body ECU (multiplex network body ECU) is malfunctioning.


b.

If the MPX-B NO. 1 fuse (the main power source fuse of the main body ECU (multiplex network body ECU)) is removed with the door control battery charged, power will be supplied to the main body ECU (multiplex network body ECU) from the door control battery for up to 50 minutes. At this time, the main body ECU (multiplex network body ECU) will be able to function with the MPX-B NO. 1 fuse (the main power source fuse of the main body ECU (multiplex network body ECU)) removed.