Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR › from 2016.11
RM3160E _58 Vehicle Interior _019709 MIRROR (INT) _0104191 INNER REAR VIEW MIRROR G

MIRROR (INT)  INNER REAR VIEW MIRROR  INSPECTION  


PROCEDURE

Hide 87810 1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)

a.

Inspect the operation of the electrochromic inner rear view mirror assembly.

B324604C02
5.135,1.125 5.479,1.469 false 5.635,0.865 5.979,1.208 false 5.521,1.49 5.802,1.74 0.281,0.25 10 false *a 4.5,2.26 4.854,2.594 0.354,0.333 10 false *c 6.031,1.219 6.333,1.531 0.302,0.313 10 false *b 1.042,1.646 1.385,1.938 0.344,0.292 10 false *e 6.083,2.26 6.573,2.583 0.49,0.323 10 false *d 2.583,0.646 2.75,0.802 0.167,0.156 10 false *f
*a Black Colored Tape *b Forward Sensor
*c Bright *d Dark
*e Battery *f Component without harness connected
(Inner Rear View Mirror Assembly)


i.

Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.


ii.

Press the AUTO switch.


iii.

Attach black colored tape to the forward sensor to prevent it from sensing.


iv.

Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

OK:

Mirror surface changes from bright to dark.




Hide 87810 2.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)

a.

Inspect the operation of the electrochromic inner rear view mirror assembly.

B385710C02
4.521,1.24 4.854,0.938 false 4.875,1.479 5.208,1.177 false 4.198,2.156 4.365,2.323 4.365,2.323 4.698,2.323 false 4.74,1.479 5.052,1.635 0.313,0.156 10 false *a 4.344,1.229 4.656,1.385 0.313,0.156 10 false *b 4,2.229 4.313,2.385 0.313,0.156 10 false *c 6.042,2.24 6.354,2.396 0.313,0.156 10 false *d 0.938,1.604 1.25,1.76 0.313,0.156 10 false *e 4.771,2.25 5.083,2.406 0.313,0.156 10 false *f 2.49,0.583 3.031,0.948 0.542,0.365 10 false *g
*a Black Colored Tape *b Forward Sensor
*c Bright *d Dark
*e Battery *f EC Switch
*g Component without harness connected
(Inner Rear View Mirror Assembly)
- -


i.

Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.


ii.

Press the EC switch.


iii.

Attach black colored tape to the forward sensor to prevent it from sensing.


iv.

Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

OK:

Mirror surface changes from bright to dark.