Home › Suspension › REAR SUSPENSION › REAR TRAILING ARM › from 2018.09
RM3160E _53 Suspension _019690 REAR SUSPENSION _0109434 REAR TRAILING ARM A

REAR SUSPENSION  REAR TRAILING ARM  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 89546 2.SEPARATE REAR SPEED SENSOR (for AWD)

a.
C293834

Remove the bolt and separate the rear speed sensor from the rear trailing arm assembly.


Hide 48780E 3.REMOVE REAR TRAILING ARM ASSEMBLY

a.
C293835

Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the rear trailing arm assembly.


b.
C293822C01
0.26,1.438 0.76,1.438 true 0.219,1.677 0.438,1.677 false 0.094,1.354 0.406,1.51 0.313,0.156 10 false *a 0.042,1.583 0.354,1.771 0.313,0.188 10 false *b
*a Wooden Block
*b Jack


Support the rear No. 2 suspension arm assembly using a jack and wooden block.

CAUTION:

Do not jack up the rear No. 2 suspension arm assembly too high as the vehicle may fall.


NOTICE:

When jacking up the rear No. 2 suspension arm assembly, be sure to jack it up slowly.



c.
C293836

Remove the 4 bolts, 2 washers and rear trailing arm assembly.


d.

Slowly lower the rear No. 2 suspension arm assembly.