Home › Vehicle Exterior › BODY PANEL › FENDER APRON BRACE (for Gasoline Model) › 2020.02–2021.10
BM37A0E _01 Vehicle Exterior _087817 BODY PANEL _0419582 FENDER APRON BRACE(for Gasoline Model) F

BODY PANEL  FENDER APRON BRACE(for Gasoline Model)  CUT AND JOIN REPLACEMENT SECTIONS  


K156355

With the radiator side support assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

K156143C01
1.99,2.281 2.302,2.438 0.313,0.156 10 false *a
*a 175 mm (6.89 in.) - -


K156144


INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld
K108825

Plug Weld
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K156145C01
0.917,1.417 1.083,1.417 1.083,1.417 1.396,1.646 false 0.76,1.313 1.073,1.469 0.313,0.156 10 false *1 2.313,0.458 2.625,0.615 0.313,0.156 10 false *a
*1 FRONT APRON TO COWL SIDE MEMBER UPPER - -
*a 175 mm (6.89 in.) - -



d.

Weld the front apron to cowl side member upper to the vehicle side.

K156146C01
1.292,1.271 1.042,0.927 1.042,0.927 0.875,0.927 false 0.708,0.823 1.021,0.979 0.313,0.156 10 false *1
*1 FRONT APRON TO COWL SIDE MEMBER UPPER - -


K156147


e.

After welding, apply body sealer to the corresponding parts. (See the painting /coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.