Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH
BM37A0E _01 Vehicle Exterior _087817 BODY PANEL _0419594 BACK DOOR OPENING TROUGH F

BODY PANEL  BACK DOOR OPENING TROUGH  CUT AND JOIN REPLACEMENT SECTIONS  


K155782

With the quarter panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

K155783C01
1.219,0.615 1.531,0.771 0.313,0.156 10 false *a
*a 50 mm (1.97 in.) - -



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K155784C01
1.031,0.896 1.198,0.896 1.198,0.896 1.479,1.344 false 0.865,0.802 1.177,0.958 0.313,0.156 10 false *1
*1 REAR BODY REAR SIDE PANEL SUB-ASSEMBLY - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.