With the back door opening trough cut and join replacement sections and body lower back panel assembly removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Remove Weld Points |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
If the entire supply part is not needed, remove the part of the supply part that is needed.
| *1 | ROOF SIDE PANEL INNER REAR | *2 | ROOF SIDE REINFORCEMENT INNER |
| *3 | SEAT BELT ANCHOR REINFORCEMENT NO.2 | *4 | ROOF SIDE PANEL INNER FRONT |
| *5 | SEAT BELT ANCHOR REINFORCE NO.1 UPPER | - | - |
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.