Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.
Wipe off the remaining double-sided tape using a clean cloth or equivalent.
If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.
After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.
The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.
| *A | for HV Model | - | - |
| *1 | NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE | *2 | NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE |
| *3 | SYMBOL EMBLEM | - | - |
| ● | Non-reusable part | - | - |
| *A | w/ AWD Plate | - | - |
| *1 | NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE | *2 | NO. 5 BACK DOOR NAME PLATE |
| ● | Non-reusable part | - | - |
| *A | for HV Model | - | - |
| *1 | FRONT DOOR NAME PLATE | *2 | NO. 2 FRONT DOOR NAME PLATE |
| ● | Non-reusable part | - | - |
INSTALL SYMBOL EMBLEM
INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 16.1 mm (0.634 in.) | B | 28.4 mm (1.12 in.) |
| C | 21.1 mm (0.831 in.) | - | - |
INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE (w/ AWD Plate)
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 21.5 mm (0.846 in.) | B | 19.5 mm (0.768 in.) |
| C | 42.9 mm (1.69 in.) | - | - |
INSTALL NO. 5 BACK DOOR NAME PLATE
for GLE Plate:
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 21.5 mm (0.846 in.) | B | 41.6 mm (1.64 in.) |
| C | 19.3 mm (0.760 in.) | - | - |
for Limited Plate:
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 21.3 mm (0.839 in.) | B | 49.4 mm (1.94 in.) |
| C | 20.3 mm (0.799 in.) | - | - |
INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for HV Model)
| *a | R End | *b | R End of Back Door Panel |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 44.7 mm (1.76 in.) | B | 23.2 mm (0.91 in.) |
| C | 28.8 mm (1.13 in.) | - | - |
INSTALL FRONT DOOR NAME PLATE (for HV Model)
| *a | Profile of Front Door Panel | *b | R End |
| *c | R End of Front Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 190.3 mm (7.49 in.) | B | 340.4 mm (1.12 ft.) |
| C | 173.7 mm (6.84 in.) | D | 204.8 mm (8.06 in.) |
INSTALL NO. 2 FRONT DOOR NAME PLATE (for HV Model)
| *a | Profile of Front Door Panel | *b | R End |
| *c | R End of Front Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 206.3 mm (8.12 in.) | B | 348.9 mm (1.14 ft.) |
| C | 183.1 mm (7.21 in.) | D | 185.7 mm (7.31 in.) |