Home › Vehicle Exterior › BODY PANEL › FENDER APRON BRACE (for HV Model) › 2020.02–2021.10
BM37A0E _01 Vehicle Exterior _087817 BODY PANEL _0419610 FENDER APRON BRACE(for HV Model) F

BODY PANEL  FENDER APRON BRACE(for HV Model)  ASSEMBLY REPLACEMENT  


K156355

With the radiator side support assembly and cowl top side upper panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.

K156148

K156149C01
0,0 0,0 false


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K156150C01
2.083,1.615 1.833,1.271 1.833,1.271 1.667,1.271 false 1.49,1.167 1.802,1.323 0.313,0.156 10 false *1
*1 FRONT APRON TO COWL SIDE MEMBER UPPER - -


K156151C01
4.76,0.802 4.833,0.167 4.833,0.167 5,0.167 false 5.281,0.927 5.417,0.167 5.417,0.167 5.583,0.167 false 5.063,0.063 5.375,0.219 0.313,0.156 10 false *1 5.646,0.073 5.958,0.229 0.313,0.156 10 false *2
*1 APRON FENDER SIDE EXTENSION *2 FRONT SIDE PANEL BRACKET NO.2



c.

After welding, apply body sealer to the corresponding parts. (See the painting /coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.