Measure points with the cool air intake duct seal and front fender upper protector removed.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Cowl Top Ventilator Louver Installationr Clip | - |
| B, b | Front Fender Installation Bolt | M6 (0.24) |
| C, c | Headlight Installation Screw | - |
| D, d | Headlight Installation Screw | - |
| E, e | Radiator Grille Installation Bolt | M8 (0.31) |
| *a | mm
(in.) |
- | - |
| *W | Width distance | *L | Length distance |
| *X | Diagonal distance | - | - |