PRECAUTIONS WHEN REPAIRING BODY
Refer to the TOYOTA Repair Manual for the SRS airbag system precaution and inspection procedures.
Vehicle Interior > SUPPLEMENTAL RESTRAINT SYSTEMS
Apply masking tape to the door side airbag sensor to prevent the entry of foreign matter.
Use large, clearly visible pieces of masking tape to prevent tape from being left on the sensor after the procedure.
| PRECAUTION | INSPECTION/PROCEDURE | |
|---|---|---|
| Prevention of foreign matter entry into sensor | Painting and grinding with service hole cover removed | ·
Before performing work, apply masking tape to the airinlet (A) of the door side airbag sensor to prevent the entry of foreign matter. (such as paint. dust and pieces of glass) ·
Keep the spray of vacuum cleaner nozzle away from the sensor. Otherwise, it may be damaged. |
| Applying anti-rust agents (wax) | ||
| Removing pieces of glass from inside door panel | ||
| *1 | Door side airbag sensor |
| *2 | Air inlet |