Home › Vehicle Exterior › BODY PANEL › FENDER APRON BRACE (for HV Model) › from 2021.10
BM37A0E _01 Vehicle Exterior _087817 BODY PANEL _0419610 FENDER APRON BRACE(for HV Model) F

BODY PANEL  FENDER APRON BRACE(for HV Model)  ASSEMBLY REPLACEMENT  


K156355

With the radiator side support assembly and cowl top side upper panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.

K160097

K160098


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Weld the front fender apron extension front and front apron to cowl side member upper to the vehicle side.

K160090C01
2.094,1.146 2.198,0.198 2.198,0.198 2.427,0.198 false 1.219,1.635 0.813,1.094 0.813,1.094 0.594,1.094 false 0.396,1 0.708,1.156 0.313,0.156 10 false *1 2.49,0.115 2.802,0.271 0.313,0.156 10 false *2
*1 FRONT FENDER APRON EXTENSION FRONT *2 FRONT APRON TO COWL SIDE MEMBER UPPER



d.

Weld the cowl top to cowl brace inner No.1 or cowl top to cowl brace inner No.2 to the vehicle side.

K160091C01
4.177,3.031 3.906,3.031 3.906,3.031 3.542,1.729 false 4.229,2.958 4.542,3.115 0.313,0.156 10 false *1
*1 LH : COWL TOP TO COWL BRACE INNER NO.2
RH : COWL TOP TO COWL BRACE INNER NO.1
- -



e.

Weld the front apron to cowl side member outer front and front fender apron gusset lower to the vehicle side.

K160092C01
0.896,2.156 0.677,1.219 0.677,1.219 0.448,1.219 false 1.719,1.458 2.104,0.625 2.104,0.625 2.333,0.625 false 2.385,0.542 2.698,0.698 0.313,0.156 10 false *1 0.271,1.146 0.583,1.302 0.313,0.156 10 false *2
*1 FRONT APRON TO COWL SIDE MEMBER OUTER FRONT *2 FRONT FENDER APRON GUSSET LOWER



f.

Weld the front fender apron gusset upper to the vehicle side.

K160093C01
2.594,1.615 2.115,1.073 2.115,1.073 1.844,1.073 false 1.667,0.979 1.979,1.135 0.313,0.156 10 false *1
*1 FRONT FENDER APRON GUSSET UPPER - -



g.

Weld the apron fender side extension and front side panel bracket No.2 to the vehicle side.

K160094C01
3.542,1.271 4.115,0.563 4.115,0.563 4.365,0.563 false 2.906,1.146 2.583,0.24 2.583,0.24 2.375,0.24 false 2.188,0.156 2.5,0.313 0.313,0.156 10 false *1 4.417,0.49 4.729,0.646 0.313,0.156 10 false *2
*1 APRON FENDER SIDE EXTENSION *2 FRONT SIDE PANEL BRACKET NO.2



h.

After welding, apply body sealer to the corresponding parts. (See the painting /coating)


i.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.