Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM
NM37A0E _51 Engine / Hybrid System _086616 HYBRID / BATTERY CONTROL _0415276 HYBRID CONTROL SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  DETAILS  INVERTER WITH CONVERTER  


CONSTRUCTION


a.

A compact, lightweight inverter with converter assembly, in which the MG ECU, inverter, boost converter and DC-DC converter are integrated, is used. The inverter and boost converter primarily consist of Intelligent Power Modules (IPMs), a reactor, and capacitor. The IPM is an integrated power module consisting of a signal processor, protective function processor, and Insulated Gate Bipolar Transistors (IGBTs).


b.

The inverter with converter assembly ensures heat dissipation through use of a water-cooled cooling system that is isolated from the engine cooling system.


c.

As a safety measure due to the use of high-voltage electricity, interlock switches are provided, which shut off the system main relays via the hybrid vehicle control ECU when the inverter cover is removed or a high-voltage connector is disconnected.

W144689C01
1.167,2 0.813,2 false 1.167,2.802 0.813,2.802 false 0.594,1.906 0.906,2.104 0.313,0.198 10 false *1 0.583,2.729 0.896,2.927 0.313,0.198 10 false *2
*1 Boost Converter / Inverter *2 DC-DC Converter / Reactor
V100135

HV Coolant Outlet
V100136

HV Coolant Inlet



d.

The inverter uses the IPM to perform switching control. The IPMs for the generator (MG1), motor (MG2) and motor (MGR)* each have a bridge circuit consisting of IGBTs. The IPM for the generator (MG1) uses 6 IGBTs (one for each arm), the IPM for the motor (MG2) uses 6 pairs of IGBTs (single in parallel for each arm), and the IPM for the motor (MGR) uses 6 IGBTs (one for each arm)*.


e.

The boost converter uses a boost IPM to perform switching control, a reactor to act as an inductor, and a capacitor to accumulate and store electricity. The boost IPM uses IGBT2 for boosting voltage, and IGBT1 for reducing voltage.

*: 4WD/AWD models


W142486E05
0.823,0.698 1.052,0.698 1.052,0.698 1.896,1.198 true 2.458,7.333 3.25,7.948 3.25,7.948 3.417,7.948 true 0.833,2.073 1.771,2.135 true 0.635,7.552 0.813,7.552 0.813,7.552 1.792,7.323 true 2.427,6.865 3.188,6.969 3.188,6.969 3.354,6.969 true 0.667,6.531 0.833,6.531 0.833,6.531 1.833,6.865 true 0.75,3.583 1.135,3.583 true 0.76,5.563 0.927,5.563 0.927,5.563 1.969,5.75 true 3.802,0.552 4.26,0.75 0.458,0.198 10 false MG2 5.552,0.573 6.01,0.771 0.458,0.198 10 false MGR* 0.292,0.531 0.76,1.198 0.469,0.667 10 false Inverter Current Sensor 1.74,5.177 2.563,5.375 0.823,0.198 10 false IPM for MG1 1.031,8.708 2.104,8.906 1.073,0.198 10 false Boost Converter 0.125,5.49 0.75,5.698 0.625,0.208 10 false Capacitor 0.24,3.5 0.781,3.708 0.542,0.208 10 false Inverter 1.385,7.5 2.063,7.698 0.677,0.198 10 false Boost IPM 1.406,8.031 1.927,8.24 0.521,0.208 10 false Reactor 3.24,9.177 5.563,9.563 2.323,0.385 10 false Inverter with Converter Assembly 3.844,6.135 4.76,6.333 0.917,0.198 10 false MG ECU 3.667,7.406 4.813,7.698 1.146,0.292 10 false DC-DC Converter 5.542,8.615 6.594,9.052 1.052,0.438 10 false Compressor with Motor Assembly 5.583,6.604 6.479,7.208 0.896,0.604 10 false Hybrid Vehicle Control ECU 2.25,9.448 3.167,9.646 0.917,0.198 10 false HV Battery 3.552,5.167 4.542,5.365 0.99,0.198 10 false IPM for MG2 0.458,2.01 0.885,2.208 0.427,0.198 10 false IGBT 5.583,1.302 5.74,1.5 0.156,0.198 10 false U 5.427,1.302 5.583,1.5 0.156,0.198 10 false V 5.719,1.313 5.875,1.51 0.156,0.198 10 false W 3.448,7.865 4.438,8.063 0.99,0.198 10 false IGBT2 0.198,7.5 0.656,7.667 0.458,0.167 10 false IGBT1 0.229,6.448 1.219,6.646 0.99,0.198 10 false IGBT1 3.427,6.906 3.958,7.125 0.531,0.219 10 false IGBT2 1.948,0.563 2.406,0.76 0.458,0.198 10 false MG1 3.938,1.313 4.094,1.51 0.156,0.198 10 false W 2.115,1.323 2.271,1.521 0.156,0.198 10 false W 3.792,1.313 3.948,1.51 0.156,0.198 10 false U 1.969,1.323 2.125,1.521 0.156,0.198 10 false U 3.635,1.313 3.792,1.51 0.156,0.198 10 false V 1.802,1.323 1.958,1.521 0.156,0.198 10 false V 5.292,5.146 6.281,5.344 0.99,0.198 10 false IPM for MGR* 0.156,9.417 1.771,9.708 1.615,0.292 10 false *: 4WD/AWD models


f.

MG ECU

i.

The MG ECU is provided in the inverter with converter assembly. In accordance with the signals received from the hybrid vehicle control ECU, the MG ECU controls the inverter and boost converter in order to drive generator (MG1), motor (MG2) or motor (MGR)* or cause them to generate electricity.


ii.

The MG ECU transmits information that is required for vehicle control, such as the atmospheric pressure, inverter temperature and any failure information, to the hybrid vehicle control ECU. The MG ECU receives information that is required for controlling generator (MG1), motor (MG2) and motor (MGR)*, such as the required motive force and the temperature of generator (MG1), motor (MG2) and motor (MGR)*, from the hybrid vehicle control ECU.

*: 4WD/AWD models




g.

Temperature Sensor for Inverter with Converter Assembly

i.

For the inverter with converter assembly, there are 5 different temperature sensors; one of them is located at the IPMs for motor (MG2), one of them is located at the IPM for the generator (MG1), 2 of them are located at the boost converter, and the remaining sensor is located at the HV coolant passage.*1


ii.

For the inverter with converter assembly, there are 6 different temperature sensors; one of them is located at the IPM for the motor (MG2), one of them is located at the IPM for the generator (MG1), one of them is located at the IPM for the motor (MGR), 2 of them are located at the boost converter, and the remaining sensor is located at the HV coolant passage.*2


iii.

These sensors detect the temperatures at areas inside the inverter with converter assembly, and transmit that temperature information to the hybrid vehicle control ECU via the MG ECU. The hybrid vehicle control ECU optimizes the cooling system according to the temperature information, maintaining the output performance of the inverter with converter assembly.

*1: 2WD models

*2: 4WD/AWD models


W142487E08
1.667,1.448 1.844,0.167 1.844,0.167 2.063,0.167 true 3.333,1.448 3.51,0.167 3.51,0.167 3.729,0.167 true 4.875,0.99 5.188,0.177 5.188,0.177 5.396,0.177 true 5.438,1.323 5.917,0.521 5.917,0.521 6.188,0.521 true 5.406,1.792 5.958,0.875 5.958,0.875 6.146,0.875 true 2.854,0.323 3.313,0.521 0.458,0.198 10 false MG2 1.177,0.344 1.635,0.542 0.458,0.198 10 false MG1 5.458,0.104 6.906,0.438 1.448,0.333 10 false Inverter Current Sensor 3.813,0.094 4.313,0.406 0.5,0.313 10 false IPM for MG2 2.135,0.083 2.615,0.479 0.479,0.396 10 false IPM for MG1 3.292,4.927 3.75,5.125 0.458,0.198 10 false *1 4.865,4.917 5.323,5.115 0.458,0.198 10 false *2 0.781,5.875 1.24,6.073 0.458,0.198 10 false *3 3.719,6.438 3.896,6.635 0.177,0.198 10 false *5 4.406,6.198 5.635,6.427 1.229,0.229 10 false HV Coolant Flow 2.125,7.708 3.24,7.906 1.115,0.198 10 false Boost Converter 6.25,0.448 6.75,0.688 0.5,0.24 10 false Inverter 4.698,6.844 5.635,7.26 0.938,0.417 10 false Hybrid Vehicle Control ECU 2.833,6.99 3.75,7.188 0.917,0.198 10 false MG ECU 0.417,7.188 1.333,7.385 0.917,0.198 10 false Boost IPM 0.635,7.667 1.406,7.865 0.771,0.198 10 false Reactor 5.844,1.5 6.927,2.51 1.083,1.01 10 false *1: Temperature Sensor on IPM for MG2 5.906,4.615 6.99,5.635 1.083,1.021 10 false *4: Temperature Sensor on Boost IPM (Lower) 5.896,5.656 6.875,6.552 0.979,0.896 10 false *5: HV Coolant Temperature Sensor 1.51,1.073 1.667,1.271 0.156,0.198 10 false W 1.344,1.073 1.5,1.271 0.156,0.198 10 false U 1.167,1.073 1.323,1.271 0.156,0.198 10 false V 4.49,0.323 4.948,0.521 0.458,0.198 10 false MGR*7 3.188,1.073 3.344,1.271 0.156,0.198 10 false W 4.896,1.073 5.052,1.271 0.156,0.198 10 false W 3.021,1.073 3.177,1.271 0.156,0.198 10 false U 4.729,1.073 4.885,1.271 0.156,0.198 10 false U 2.865,1.073 3.021,1.271 0.156,0.198 10 false V 4.563,1.083 4.719,1.281 0.156,0.198 10 false V 5.885,3.615 6.917,4.563 1.031,0.948 10 false *3: Temperature Sensor on Boost IPM (Upper) 5.854,2.573 7.125,3.573 1.271,1 10 false *2: Temperature Sensor on IPM for MGR (4WD/AWD models) 1.333,5.875 1.792,6.073 0.458,0.198 10 false *4 6.208,0.813 6.708,1.188 0.5,0.375 10 false IPM for MGR*7 5.458,7.729 7,8.104 1.542,0.375 10 false *7: 4WD/AWD models 1.479,4.948 1.938,5.146 0.458,0.198 10 false *6 5.885,6.615 7.135,7.594 1.25,0.979 10 false *6: Temperature Sensor on IPM for MG1



h.

Inverter Current Sensor

i.

The inverter current sensors detect the amperage of the three-phase alternating current that actuates generator (MG1), motor (MG2) and motor (MGR)*. This actual amperage is used as feedback by the MG ECU.


ii.

Current sensors are used for the current sent to the three-phase windings of generator (MG1), motor (MG2) and motor (MGR)*. The current sensors are located in the inverter with converter assembly for the U, V and W phases of each generator and motor.

*: 4WD/AWD models


W136966E06
3.844,1.875 4.427,1.042 4.427,1.042 4.594,1.042 true 3.313,1.75 2.813,1.833 2.813,1.833 2.646,1.833 true 2.427,1.563 2.927,1.563 true 1.188,1.719 2.625,1.906 1.438,0.188 10 false Inverter Current Sensor 2.083,0.563 3.219,0.833 1.135,0.271 10 false Generator/Motor 4.625,0.948 6.24,1.146 1.615,0.198 10 false Inverter Current Sensor 0.969,1.448 2.417,1.646 1.448,0.198 10 false Inverter Current Sensor 5.167,1.469 6.083,1.667 0.917,0.198 10 false MG ECU 3.281,0.396 3.438,0.594 0.156,0.198 10 false U 2.958,0.99 3.115,1.188 0.156,0.198 10 false V 3.802,1 3.958,1.198 0.156,0.198 10 false W 2.667,3.813 3.583,4.01 0.917,0.198 10 false Inverter 0.052,4.177 7.156,4.417 7.104,0.24 12 false Characteristics of Inverter Current Sensor: 1.573,4.792 2.031,4.99 0.458,0.198 10 false 4.5 1.583,5.542 2.042,5.74 0.458,0.198 10 false 2.5 1.594,6.313 2.052,6.51 0.458,0.198 10 false 0.5 1.854,6.583 2.313,6.781 0.458,0.198 10 false -400 4.083,6.635 4.542,6.833 0.458,0.198 10 false 0 6.083,6.583 6.542,6.781 0.458,0.198 10 false 400 1.292,6.573 1.75,6.771 0.458,0.198 10 false MG1 1.292,6.854 1.75,7.052 0.458,0.198 10 false MG2 1.844,6.854 2.302,7.052 0.458,0.198 10 false -850 6.083,6.865 6.542,7.073 0.458,0.208 10 false 850 0.531,5.313 1.458,5.667 0.927,0.354 10 false Sensor Output Voltage (V) 3.813,7.302 5.5,7.5 1.688,0.198 10 false Current (A) 6.073,7.125 6.531,7.333 0.458,0.208 10 false 300 1.292,7.115 1.75,7.313 0.458,0.198 10 false MGR* 1.844,7.125 2.302,7.323 0.458,0.198 10 false -300 0.031,7.5 2.052,7.792 2.021,0.292 10 false *: 4WD/AWD models