Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM
NM37A0E _51 Engine / Hybrid System _086616 HYBRID / BATTERY CONTROL _0415277 HYBRID BATTERY SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  DETAILS  HV BATTERY JUNCTION BLOCK  


CONSTRUCTION


a.

The hybrid battery junction block assembly consists of the System Main Relays (SMRs), precharge resistor and battery current sensor.


b.

The SMRs are relays that connect and disconnect the HV battery and power cable (HV floor under wire) in accordance with the signal from the hybrid vehicle control ECU. 3 relays are provided; SMRB for the battery positive (+) side, SMRG for the battery negative (-) side, and SMRP for pre-charging.

W144697C01
4.104,1.469 4.271,1.135 4.271,1.135 4.438,1.135 true 3.594,0.635 3.76,0.302 3.76,0.302 3.927,0.302 true 4.417,1.823 4.583,1.49 4.583,1.49 4.75,1.49 true 3.948,1.104 4.115,0.771 4.115,0.771 4.281,0.771 true 2.396,1.333 2.229,1.75 2.229,1.75 2.063,1.75 true 1.615,0.313 1.927,0.469 0.313,0.156 10 false *1 3.969,0.229 4.281,0.385 0.313,0.156 10 false *2 4.344,0.698 4.656,0.854 0.313,0.156 10 false *3 4.51,1.052 4.823,1.208 0.313,0.156 10 false *4 1.885,1.667 2.198,1.823 0.313,0.156 10 false *5 4.802,1.427 5.115,1.583 0.313,0.156 10 false *6
*1 Hybrid Battery Junction Block *2 SMRB
*3 SMRP *4 SMRG
*5 Battery Current Sensor *6 Precharge Resistor



c.

A battery current sensor, which is built into the hybrid battery junction block assembly, is used to detect the HV battery charging and discharging amperage.


d.

The hybrid vehicle control ECU optimally controls the hybrid system so that the SOC of the HV battery can always be within a specified range according to the amperage information that is received via the battery smart unit (battery voltage sensor).