Home › Steering › STEERING COLUMN › STEERING LOCK SYSTEM
NM37A0E _55 Steering _086693 STEERING COLUMN _0415631 STEERING LOCK SYSTEM CO CONTROL F

STEERING COLUMN  STEERING LOCK SYSTEM  CONTROL  STEERING LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the steering lock control system are as follows:

Component Function

*1: Gasoline models

*2: HV models

Steering Lock Actuator Assembly Steering Lock ECU Receives the steering wheel unlock/lock request signal from the certification ECU (smart key ECU assembly) and activates the steering lock motor.
Certification ECU (Smart Key ECU Assembly)
·

Certifies the electrical key transmitter sub-assembly.

·

Transmits each power supply signal for the lock/unlock motor to the steering lock ECU (steering lock actuator assembly).


ID Code Box (Immobiliser Code ECU) Sends each set/unset request signal to the steering lock ECU.
Engine Switch*1 Transmits the ignition switch signal to the certification ECU (smart key ECU assembly).
Power Switch*2
Combination Meter Assembly Buzzer Sounds to warn the driver of a malfunction in the system.
Multi-information Display Displays the warning message to inform the driver of a malfunction in the electrical steering lock system.



FUNCTION


a.

The steering lock actuator assembly is integrated into the steering lock ECU, and the ECU controls the lock bar operation in the steering lock actuator assembly through the control of the steering lock motor.


b.

The steering lock ECU detects the position (lock/unlock) of the lock bar and transmits this information to the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU).


c.

In this system, the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU) determine whether to lock and unlock the steering wheel. Then, the certification ECU (smart key ECU assembly) sends lock or unlock command signals to the steering lock ECU via LIN communication. Upon receiving the signals, the steering lock ECU operates the steering lock motor to lock or unlock the steering.

HINT:

It is not possible to replace only the steering lock ECU in the steering lock actuator assembly. Therefore, if the ECU malfunctions, the entire steering lock actuator assembly must be replaced.