Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
NM37A0E _59 Vehicle Exterior _087156 LIGHTING (EXT) _0417233 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  DAYTIME RUNNING LIGHT  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Gasoline models

*2: HV models

Main Body ECU (Multiplex Network Body ECU) Receives various signals and illuminates the daytime running lights.
No. 1 Engine Room Relay Block and No. 1 Junction Block Assembly
·

DRL Relay


Supplies power to the daytime running lights.
Turn Signal Switch
·

Light Control Switch


Sends the light control switch signal to the steering sensor.
Steering Sensor Receives light control switch signal and sends it to the main body ECU (multiplex network body ECU).
Automatic Light Control Sensor Detects the ambient light level and sends a signal to the main body ECU (multiplex network body ECU).
ECM*1 Sends the engine speed signal to the main body ECU (multiplex network body ECU).
Hybrid Vehicle Control ECU*2 Sends the READY signal to the main body ECU (multiplex network body ECU).
Brake Actuator Assembly
·

Skid Control ECU*1

·

No. 2 Skid Control ECU*2


Sends a parking brake operation signal to the main body ECU (multiplex network body ECU).


SYSTEM CONTROL


a.

Operating Condition

i.

The daytime running lights illuminate when the following conditions are met.

·

The ignition switch is turned ON.

·

The engine speed signal is input (engine is running).*1

·

Hybrid system is started.*2

·

The light control switch is in the off*3 or AUTO position (and the taillights are not turned on via the automatic light control system).

·

The parking brake operation signal is off.


*1: Gasoline models

*2: HV models

*3: Models for Middle East