Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2020.02–2020.11
NM37A0E _59 Vehicle Exterior _087156 LIGHTING (EXT) _0417233 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  AUTOMATIC LIGHT CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Automatic Light Control Sensor Detects the ambient light level and sends a signal to the main body ECU (multiplex network body ECU).
Main Body ECU (Multiplex Network Body ECU) Receives various signals and illuminates the headlights, clearance lights, taillights and license plate lights.
No. 1 Engine Room Relay Block and No. 1 Junction Block Assembly
·

H-LP LH Relay

·

H-LP RH Relay


Supplies power to the headlights.
Instrument Panel Junction Block Assembly
·

TAIL Relay


Supplies power to the clearance lights, taillights and license plate lights.
Turn Signal Switch
·

Light Control Switch


Sends the light control switch signal to the steering sensor.
Steering Sensor Receives light control switch signal and sends it to the main body ECU (multiplex network body ECU).


SYSTEM CONTROL


a.

Operating Condition

i.

The automatic light control system operates as follows:

Models for Middle East
Function Outline
Taillights turn on When all of the following conditions are met, the clearance lights, taillights and license plate lights automatically turn on:
·

The ambient light is dim or momentarily dark.

·

The ignition switch is turned ON.

·

The light control switch is in the AUTO position.


Headlights and Taillights turn on When all of the following conditions are met, the headlights, clearance lights, taillights and license plate lights automatically turn on:
·

The ambient light is dark or momentarily bright.

·

The ignition switch is turned ON.

·

The light control switch is in the AUTO position.


Headlights and Taillights turn off When the ambient light is bright, the exterior lights automatically turn off.

Except models for Middle East
Function Outline
Headlights and Taillights turn on When all of the following conditions are met, the headlights, clearance lights, taillights and license plate lights automatically turn on:
·

The ambient light is dark or momentarily bright.

·

The ignition switch is turned ON.

·

The light control switch is in the AUTO position.


Headlights and Taillights turn off When the ambient light is bright, the exterior lights automatically turn off.




DIAGNOSIS


a.

When the main body ECU (multiplex network body ECU) detects a malfunction in the automatic light control system, Diagnostic Trouble Codes (DTCs) are stored in memory.


b.

The DTCs can be read using the Global TechStream (GTS). For details, refer to the Repair Manual.