Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM
NM37A0E _58 Vehicle Interior _087157 PRE-COLLISION _0417234 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


OPERATING CONDITION


a.

When all of the following conditions have been met, the forward recognition hood with heater sub-assembly operates.

·

The ignition switch is turned ON.

·

The outside air temperature is approximately 10°C or less.

·

A few minutes have elapsed since the forward recognition hood with heater sub-assembly operation stopped.



b.

After the forward recognition hood with heater sub-assembly operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).




CONSTRUCTION


a.

The forward recognition hood with heater sub-assembly is positioned in the forward recognition bracket. The forward recognition hood with heater sub-assembly prevents condensation on the windshield in front of the forward recognition camera.

Y254691C01
1.417,1.167 3.76,1.167 true 3.948,1.552 5.865,1.552 true 1.208,1.083 1.521,1.24 0.313,0.156 10 false *a 5.948,1.469 6.26,1.625 0.313,0.156 10 false *b
*a Sheet Heater (Heating Element) *b Temperature Fuse (Built-in parts)