Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD / WINDOW GLASS SYSTEM › 2020.02–2020.11
NM37A0E _59 Vehicle Exterior _087238 WINDOW / GLASS _0417541 WINDSHIELD / WINDOW GLASS SYSTEM CO CONTROL F

WINDOW / GLASS  WINDSHIELD / WINDOW GLASS SYSTEM  CONTROL  HEATED WINDSHIELD DEFROSTER CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Air Conditioning Control Assembly
·

Front Window Deicer Switch


The air conditioning control assembly input the switch on electric current from the front window deicer switch
Sends the front window deicer switch operation signal to the air conditioning amplifier assembly.
Ambient Temperature Sensor (Thermistor Assembly) Sends the outside temperature signal to the air conditioning amplifier assembly.
Air Conditioning Amplifier Assembly Controls the heated windshield defroster system in accordance with the signals from the outside temperature sensor and front window deicer switch .
HWD NO. 1 Relay Operates the heated windshield defroster wire RH.
HWD NO. 2 Relay Operates the heated windshield defroster wire LH.
DEF Relay Operates the HWD NO. 1 relay and HWD NO. 2 relay.
Heated Windshield Defroster RH Applies electrical current to heated windshield defroster wires in the windshield glass to generate heat and remove ice from the windshield glass.
Heated Windshield Defroster LH


SYSTEM CONTROL


a.

The heated windshield defroster system is activated when the power switch is turned on (READY)*1 or the engine switch is turned on (IG) and the engine is running (engine speed is 350 rpm or more)*2, and the heated windshield defroster switch is operated. The air conditioning amplifier assembly keeps the heated windshield defroster system on for approximately 4 minutes if the outside temperature is at the predetermined level or lower.

*1: HV models

*2: Gasoline models


HINT:

If the heated windshield defroster switch is pressed when the outside temperature is 5°C (41°F) or more, the heated windshield defroster system will not operate, the indicator of the heated windshield defroster switch will blink 5 times and a message is displayed on the multi-information display in the combination meter assembly to inform the driver.