Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM
NM37A0E _51 Engine / Hybrid System _086676 CRUISE CONTROL _0417773 CRUISE CONTROL SYSTEM CO CONTROL F

CRUISE CONTROL  CRUISE CONTROL SYSTEM  CONTROL  CRUISE CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the cruise control system have the following functions:

Gasoline Models
Component Function
Steering Pad Switch Assembly Cruise Control Switch (ON-OFF Button) Turns the cruise control system on and off.
CANCEL Switch A cancel signal is output to the ECM when this switch is operated.
+RES Switch The acceleration function and resuming of a preset speed can be performed by operating this switch. A signal is output to the ECM when this switch is operated.
-SET Switch The deceleration function and vehicle speed setting resume signals are output to the ECM when this switch is operated.
Combination Meter Assembly Cruise Control Indicator
·

Based on a cruise control indicator operation signal sent by the ECM, the combination meter assembly illuminates the cruise control indicator when the cruise control system has been turned on using the cruise control switch on the steering pad switch assembly.

·

Based on a cruise control indicator operation signal sent by the ECM, the combination meter assembly turns off the cruise control indicator if a malfunction occurs in the cruise control system.


Cruise SET Indicator Cruise SET indicator Illuminates when the vehicle speed is set.
Multi-information Display Displays a warning message to alert the driver in accordance with a signal provided by the ECM.
Buzzer If the ECM detects automatic cancel or warning signals while the vehicle is operating under cruise control, this buzzer sounds to inform the driver.
Stop Light Switch Assembly Detects brake pedal depression and transmits signals to the ECM.
Brake Actuator Assembly Skid Control ECU
·

Transmits the wheel speed signal to the ECM.

·

Transmits the VSC operation signal to the ECM.


ECM
·

Controls the cruise control system in accordance with signals from switches, sensors and ECUs.

·

If the ECM detects a malfunction in the cruise control system, it will store a Diagnostic Trouble Code (DTC).


Throttle Body with Motor Assembly Throttle Control Motor Adjusts the throttle valve opening angle in accordance with signals from the ECM.
Throttle Position Sensor Detects the throttle valve opening angle and transmits signals to the ECM.
Park/Neutral Position Switch Assembly Detects the shift lever position and transmits signals to the ECM.
Shift Lock Control Unit Assembly Transmission Control Switch
·

Detects the shift lever position and transmits signals to the ECM.

·

Informs the ECM of driver upshift or downshift operations while the shift lever is in M.


Accelerator Pedal Sensor Assembly Detects the accelerator pedal depression angle and transmits signals to the ECM.
VSC OFF Switch Detects the VSC OFF or TRC OFF signals and transmits signals to the skid control ECU.
4WD ECU Assembly Transmits the multi-terrain select mode to the ECM.
Multi-terrain Select Switch Detects the multi-terrain select mode and transmits signals to the 4WD ECU assembly.
Downhill Assist Control Switch Detects the switch condition and transmits signals to the skid control ECU.
Central Gateway ECU (Network Gateway ECU) Gateway function of CAN communication.

HV Models
Component Function

*: 4WD/ AWD Models

Steering Pad Switch Assembly Cruise Control Switch (ON-OFF Button) Turns the cruise control system on and off.
CANCEL Switch A cancel signal is output to the hybrid vehicle control ECU when this switch is operated.
+RES Switch The acceleration function and resuming of a preset speed can be performed by operating this switch. A signal is output to the hybrid vehicle control ECU when this switch is operated.
-SET Switch The deceleration function and vehicle speed setting resume signals are output to the hybrid vehicle control ECU when this switch is operated.
Hybrid Vehicle Control ECU
·

Controls the cruise control system in accordance with signals from switches, sensors and ECUs.

·

If the hybrid vehicle control ECU detects a malfunction in the cruise control system, it will store Diagnostic Trouble Codes (DTCs).


Inverter with Converter Assembly MG ECU Built into the inverter with converter assembly. Controls the motive force of hybrid vehicle transaxle assembly in accordance with signals from the hybrid vehicle control ECU.
Hybrid Vehicle Transaxle Assembly Generates motive force for the front wheels.
Rear Traction Motor* Generates motive force for the rear wheels.
Combination Meter Assembly Cruise Control Indicator
·

Based on a cruise control indicator operation signal sent by the hybrid vehicle control ECU, the combination meter assembly illuminates the cruise control indicator when the cruise control system has been turned on using the cruise control switch on the steering pad switch assembly.

·

Based on a cruise control indicator operation signal sent by the hybrid vehicle control ECU, the combination meter assembly turns off the cruise control indicator if a malfunction occurs in the cruise control system.


Cruise SET Indicator Cruise SET indicator Illuminates when the vehicle speed is set.
Multi-information Display Displays a warning message to alert the driver in accordance with a signal provided by the hybrid vehicle control ECU.
Buzzer If the hybrid vehicle control ECU detects automatic cancel or warning signals while the vehicle is operating under cruise control, this buzzer sounds to inform the driver.
Stop Light Switch Assembly Detects brake pedal depression and transmits signals to the hybrid vehicle control ECU.
Brake Actuator Assembly Skid Control ECU
·

Transmits the wheel speed signal to the hybrid vehicle control ECU.

·

Transmits the VSC operation signal to the hybrid vehicle control ECU.


ECM Actuates the throttle control motor in accordance with the signals from the hybrid vehicle control ECU.
Throttle Body with Motor Assembly Throttle Control Motor Adjusts the throttle valve opening angle in accordance with signals from the ECM.
Throttle Position Sensor Detects the throttle valve opening angle and transmits signals to the ECM.
Shift Lock Control Unit Assembly Transmission Control Switch
·

Detects the shift lever position and transmits signals to the ECM.

·

Informs the ECM of driver upshift or downshift operations while the shift lever is in S.


Shift Lever Position Sensor Detects the shift lever position and transmits signals to the hybrid vehicle control ECU.
Accelerator Pedal Sensor Assembly Detects the accelerator pedal depression angle and transmits signals to the hybrid vehicle control ECU.
VSC OFF Switch Detects the VSC OFF or TRC OFF signals and transmits signals to the skid control ECU.
Central Gateway ECU (Network Gateway ECU) Gateway function of CAN communication.



FUNCTION


a.

Function List for Gasoline Models

i.

The cruise control system has the following control functions:

Gasoline Models
Function Outline
Constant Speed Control The ECM compares the actual vehicle speed and the set speed and if the vehicle speed is lower than the set speed, it uses the throttle control motor to increase the throttle valve opening angle.
Set Control When this system fulfils the following conditions, and the -SET switch on the steering pad switch assembly is pressed and released, the ECM stores the vehicle speed and maintains the vehicle constantly at that speed.
·

The cruise control system has been turned on using the cruise control switch on the steering pad switch assembly.

·

The vehicle is being driven at a speed of approximately 30 km/h (20 mph) to 200 km/h (125 mph).


Low Speed Limit Control The low speed limit is the lowest speed that cruise control can be set at and it is designed to be approximately 30 km/h (20 mph). The cruise control system cannot be set below that speed. If the vehicle speed drops below that speed while the cruise control is operating, speed control by the cruise control system will be canceled automatically. However, the set speed is kept in memory.
Coast Control While the -SET switch on the steering pad switch assembly is pushed continuously, the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will decelerate.

·

The set vehicle speed changes to the speed at which the -SET switch is released.


Tap Down Control When the -SET switch on the steering pad switch assembly is pushed momentarily (approximately 0.6 seconds or less), the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will decelerate in increments of approximately 1 km/h or 1 mph each time the switch is moved.

·

However, if the difference between the actual vehicle speed and the set vehicle speed is greater than 5 km/h (3 mph), the set vehicle speed will change to the speed at which the vehicle is being driven when the switch is pushed.


Accelerator Control While the +RES switch on the steering pad switch assembly is pushed continuously, the vehicle speed and the set vehicle speed change as follows:
·

The vehicle accelerates constantly.

·

The set vehicle speed changes to the speed at which the +RES switch is released.


Tap Up Control When the +RES switch on the steering pad switch assembly is pushed momentarily (approximately 0.6 seconds or less), the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will accelerate in increments of approximately 1 km/h or 1 mph each time the switch is moved.

·

However, if the difference between the actual vehicle speed and the set vehicle speed is greater than 5 km/h (3 mph), the set vehicle speed will not change.


Resume Control When the vehicle speed is above the low speed limit, the cruise control system resumes operation (when the +RES switch on the steering pad switch assembly is pushed) to reach the vehicle speed that was set at the time the driver canceled cruise control. Even if the vehicle speed dropped below the low speed limit, the set speed can be resumed after the vehicle speed increases above the low speed limit. Also, if the vehicle speed memory is deleted, the return control cannot be performed.
Shift Down Control When the vehicle is traveling uphill using cruise control, automatic transmission control may cause the transmission to shift down. During shift-down control, when the end of uphill travel is determined based on the throttle valve angle, the transmission will shift up after a certain period of time. When the transmission shifts down during accelerator control or resume control, the transmission will shift up after accelerator control or resume control ends.
Manual Cancel Control If any of the following signals are sent to the ECM, cruise control speed control operation is canceled accordingly.
·

Stop light switch on signal (The brake pedal is depressed).

·

Shift lever is moved from D to any other position.

·

Cruise control switch off signal (Cruise control switch on the steering pad switch assembly is pushed).

·

CANCEL switch on signal (CANCEL switch on the steering pad switch assembly is pushed).

·

Electric parking brake is applied.


Automatic Cancel Control If the following condition occurs during cruise control speed control operation, the speed that is set in memory is cleared and cruise control speed control operation is canceled.
·

Stop light switch open or short circuit.


Furthermore, the cruise control indicator turns off, and a message indicating a malfunction will be displayed on the multi-information display until the cruise control system is turned off using the cruise control switch on the steering pad switch assembly. The operation of the cruise control is disabled until the cruise control system is turned on again using the cruise control switch on the steering pad switch assembly.
If the following condition occurs during cruise control speed control operation, the speed that is set in memory is cleared and cruise control speed control operation is canceled.
·

Malfunction in the engine control system.


Furthermore, speed control by the cruise control system is disabled until the cruise control system is turned on again using the cruise control switch on the steering pad switch assembly.
If any of the following conditions occur during cruise control speed control operation, the speed that is set in memory is cleared and cruise control speed control operation is canceled.
·

Stop light switch input signal is abnormality.

·

Cancel circuit malfunction.

·

Communication malfunction between the skid control ECU and ECM.

·

Brake control system malfunction.


Furthermore, the cruise control indicator turns off, and a message indicating a malfunction will be displayed on the multi-information display until the cruise control system is turned off using the cruise control switch on the steering pad switch assembly. The operation of the cruise control is disabled until the ignition switch is turned off.
If the following condition occurs while the cruise control system is controlling the vehicle speed, the speed that is stored in memory is cleared and speed control by the cruise control system is canceled.
·

Vehicle speed decreases by 16 km/h (10 mph) or more below the speed at which the cruise control is set.


If the following condition occurs while the cruise control system is controlling the vehicle speed, speed control by the cruise control system is canceled.
·

Vehicle speed decreases below the low speed limit (approximately 30 km/h [20 mph]).


Other Cancellation Items
·

VSC operates during cruise control driving.

·

TRC operates for a certain period of time while the cruise control.

·

TRC is off or VSC is off.

·

Ignition switch off.





b.

Function List for HV Models

i.

The cruise control system has the following control functions:

HV Models
Function Outline
Constant Speed Control The hybrid vehicle control ECU compares the actual vehicle speed with the set speed. If the vehicle speed is higher than the set speed, the hybrid vehicle control ECU calculates optimal motive forces for the engine and motor generators, and decelerates by adjusting the respective motive forces. If the vehicle speed is lower than the set speed, the hybrid vehicle control ECU calculates optimal motive forces for the engine and motor generators, and accelerates by adjusting the respective motive forces.
Set Control When this system fulfils the following conditions, and the -SET switch on the steering pad switch assembly is pressed and released, the hybrid vehicle control ECU stores the vehicle speed and maintains the vehicle constantly at that speed.
·

The cruise control system has been turned on using the cruise control switch on the steering pad switch assembly.

·

The vehicle is being driven at a speed of approximately 30 km/h (20 mph) to 200 km/h (125 mph).


Low Speed Limit Control The low speed limit is the lowest speed that cruise control can be set at and it is designed to be approximately 30 km/h (20 mph). The cruise control system cannot be set below that speed. If the vehicle speed drops below that speed while the cruise control is operating, speed control by the cruise control system will be canceled automatically. However, the set speed is kept in memory.
Coast Control While the -SET switch on the steering pad switch assembly is pushed continuously, the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will decelerate.

·

The set vehicle speed changes to the speed at which the -SET switch is released.


Tap Down Control When the -SET switch on the steering pad switch assembly is pushed momentarily (approximately 0.6 seconds or less), the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will decelerate in increments of approximately 1 km/h or 1 mph each time the switch is moved.

·

However, if the difference between the actual vehicle speed and the set vehicle speed is greater than 5 km/h (3 mph), the set vehicle speed will change to the speed at which the vehicle is being driven when the switch is pushed.


Accelerator Control While the +RES switch on the steering pad switch assembly is pushed continuously, the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will accelerate.

·

The set vehicle speed will change to the speed at which the vehicle is being driven when the switch is released.


Tap Up Control When the +RES switch on the steering pad switch assembly is pushed momentarily (approximately 0.6 seconds or less), the vehicle speed and the set vehicle speed change as follows:
·

The vehicle will accelerate in increments of approximately 1 km/h or 1 mph each time the switch is moved.

·

However, if the difference between the actual vehicle speed and the set vehicle speed is greater than 5 km/h (3 mph), the set vehicle speed will not change.


Resume Control When the vehicle speed is above the low speed limit, the cruise control system resumes operation (when the +RES switch on the steering pad switch assembly is pushed) to reach the vehicle speed that was set at the time the driver canceled cruise control. Even if the vehicle speed dropped below the low speed limit, the set speed can be resumed after the vehicle speed increases above the low speed limit. Also, if the vehicle speed memory is deleted, the return control cannot be performed.
Manual Cancel Control If any of the following signals are sent to the hybrid vehicle control ECU, speed control by the cruise control system is canceled accordingly.
·

Stop light switch on signal (The brake pedal is depressed).

·

Shift lever is moved from D to any other position. S is not canceled if certain shift-range is selected.

·

Cruise control switch off signal (Cruise control switch on the steering pad switch assembly is pushed).

·

CANCEL switch on signal (CANCEL switch on the steering pad switch assembly is pushed).

·

Electric parking brake is applied.


Automatic Cancel Control If the following condition occurs during cruise control speed control operation, the speed that is set in memory is cleared and cruise control speed control operation is canceled.
·

Stop light switch open or short circuit.


Furthermore, the master warning light illuminates, cruise control indicator turns off, and a message indicating a malfunction will be displayed on the multi-information display until the cruise control system is turned off using the cruise control switch. The operation of the cruise control is disabled until the cruise control system is turned on again using the ON-OFF button.
If the following condition occurs during cruise control speed control operation, the speed that is set in memory is cleared and cruise control speed control operation is canceled.
·

Malfunction in the hybrid system.


Furthermore, speed control by the cruise control system is disabled until the cruise control system is turned on again using the cruise control switch on the steering pad switch assembly.
If any of the following conditions occur during cruise control speed control operation, the speed that is set in memory is cleared and cruise control speed control operation is canceled.
·

Stop light switch input signal is abnormal.

·

Cancel circuit malfunction.

·

Communication malfunction between the skid control ECU and hybrid vehicle control ECU.

·

Brake control system malfunction.


Furthermore, the master warning light illuminates, cruise control indicator turns off, and a message indicating a malfunction will be displayed on the multi-information display until the cruise control system is turned off using the cruise control switch. The operation of the cruise control is disabled until the ignition switch is turned off.
If the following condition occurs while the cruise control system is controlling vehicle speed, the speed that is stored in memory is cleared and speed control by the cruise control system is canceled.
·

Vehicle speed decreases by 16 km/h (10 mph) or more below the speed at which the cruise control is set.


If the following condition occurs while the cruise control system is controlling the vehicle speed, speed control by the cruise control system is canceled.
·

Vehicle speed decreases below the low speed limit (approximately 30 km/h [20 mph]).


Other Cancel Conditions
·

VSC operates during cruise control driving.

·

TRC operates for a certain period of time while the cruise control.

·

TRC is off or VSC is off.

·

Ignition switch off.





c.

Cruise Control Operation Switch

i.

The operation switches of the cruise control system (cruise control switch, -SET switch, +RES switch and CANCEL switch) are positioned in the steering pad switch assembly.

Component Function
Cruise Control Switch (ON-OFF Button) Turns the cruise control system on and off.
+RES Switch Performs accelerator control, tap-up control and resume control.
-SET Switch Performs set control, coast control and tap-down control.
CANCEL Switch Cancels control.

Y244650C01
5.75,1.302 6.365,0.521 6.365,0.521 6.563,0.521 true 5.635,1.427 6.375,2.26 6.375,2.26 6.573,2.26 true 4.229,0.51 4.396,0.51 4.396,0.51 5.417,1.219 true 4.104,2.177 4.271,2.177 4.271,2.177 5.417,1.667 true 4.031,0.417 4.26,0.625 0.229,0.208 10 false *1 3.927,2.063 4.094,2.25 0.167,0.188 10 false *2 6.594,0.417 6.906,0.573 0.313,0.156 10 false *3 6.625,2.156 6.938,2.313 0.313,0.156 10 false *4
*1 +RES Switch *2 -SET Switch
*3 Cruise Control Switch (ON-OFF Button) *4 CANCEL Switch





DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the GTS. For details, refer to the Repair Manual.