CONSTRUCTION
The airbag cut off switch cylinder sub-assembly can be used if deployment of the instrument panel passenger airbag without door assembly is undesirable.
The airbag cut off switch cylinder sub-assembly can be operated by the mechanical key, which is supplied with the electrical key transmitter sub-assembly key. Once the airbag cut off switch cylinder sub-assembly is turned to OFF, the instrument panel passenger airbag without door assembly will be disabled, regardless of any collision that may occur.
If the instrument panel passenger airbag without door assembly has been disabled, the AIRBAG OFF indicator light in the telltale light assembly illuminates to inform the driver.
| *1 | Telltale Light Assembly | *2 | Airbag Cut Off Switch Cylinder Sub-assembly |
| *a | AIRBAG OFF Indicator | *b | AIRBAG ON Indicator |
| *c | The illustration shown is an example only. | - | - |
The table below shows whether the airbag and seat belt pretensioner for the front passenger are enabled or disabled, and the AIRBAG ON/OFF indicator condition according to the airbag cut off switch cylinder status.
| Item | Airbag Cut Off Switch Cylinder Status | |||
|---|---|---|---|---|
| ON | OFF | Failure | ||
| Front Passenger | Instrument Panel Passenger Airbag without Door Assembly | ○ | X | X |
| Front Seat Airbag Assembly | ○ | ○ | ○ | |
| Curtain Shield Airbag Assembly | ○ | ○ | ○ | |
| Seat Belt Pretensioner | ○ | ○ | ○ | |
| AIRBAG ON Indicator Light | ○ | X | X | |
| AIRBAG OFF Indicator Light | X | ○ | ○ | |
○ : Indicates airbag enabled (for airbag or pretensioners), or indicates light is on (for indicator light)
X: Indicates airbag disabled (for airbag or pretensioners), or indicates light is off (for indicator light)