SYSTEM CONTROL
When the vehicle is descending a steep hill and the engine brake alone cannot provide a sufficient deceleration force while the transaxle is in the M1 or R range, downhill assist control performs 4-wheel brake control to maintain a constant, low vehicle speed. As a result, the vehicle is able to descend in a stable manner without causing the wheels to lock.
When the vehicle descends a steep hill without downhill assist control, the driver must pay close attention to brake and accelerator pedal maneuvers. However, with downhill assist control, the driver can concentrate on the steering operation, without accelerator or brake pedal operation.
Downhill assist control enables the vehicle to maintain stability because it can descend a slippery hill at low speeds without causing the wheels to lock.
| *a | With Downhill Assist Control | *b | Without Downhill Assist Control |
| *c | Stable Speed | *d | Unstable Speed |
Downhill Assist Control Activation Conditions
Downhill assist control operates when all of the following conditions have been met.
·
The downhill assist control switch is on. ·
The shift position is in a position other than P. ·
The accelerator pedal and brake pedal are not depressed. ·
The vehicle speed is 30 km/h (18 mph) or less while moving downhill. |
Downhill Assist Control Cancellation Conditions
Downhill assist control does not operate under the conditions described below even if the downhill assist control switch is turned on. In this case, the downhill assist control indicator light blinks to alert the driver.
·
The shift position is in P. ·
The vehicle speed is greater than about 30 km/h (18 mph). ·
A malfunction occurs in the downhill assist control system. ·
The temperature of the brake actuator rises, causing the downhill assist control operation to stop. |
The downhill assist control indicator light flashes to warn the driver when any of the following conditions is met, but downhill assist control is still performed.
The downhill assist control switch is turned off while downhill assist control is operating. Afterward, brake hydraulic pressure gradually decreases and downhill assist control stops.
The shift position is moved to N.