Home › Power Source / Network › NETWORKING › MULTIPLEX COMMUNICATION SYSTEM [AVC-LAN]
NM37A0E _57 Power Source / Network _086694 NETWORKING _0419113 MULTIPLEX COMMUNICATION SYSTEM [AVC-LAN] GE GENERAL F

NETWORKING  MULTIPLEX COMMUNICATION SYSTEM [AVC-LAN]  GENERAL  GENERAL  


OUTLINE


a.

Audio Visual Communication-Local Area Network (AVC-LAN) communication, which communicates with the audio system, is used as a multiplex communication system* to simplify vehicle wire harnesses and achieve high-speed communication.

AVC-LAN Specifications
Protocol Specifications
Communication Speed 17.8 kbps
Communication Wire Twisted-pair Wire
Drive Type Differential Voltage Drive
Data Length 0 - 32 Byte (Variable)

HINT:

*: The multiplex communication system connects several ECUs together with one communication line so that they can exchange data with each other. As a result, additional wiring is not required when integrating systems and adding functions.



b.

Communication Wire

i.

A twisted pair of wires is used for AVC-LAN communication.

Communication Wire Outline
Twisted-pair Wire
Y120996

This communication wire is a pair of twisted wires. Communication is driven by applying different voltages to the 2 lines in order to send a single signal. This system, which is called a "differential voltage drive", reduces the effects of electrical noise.

Y211516E02
1.813,1.333 2.177,1.531 0.365,0.198 10 false ECU 5.073,1.323 5.417,1.573 0.344,0.25 10 false ECU 3.094,1.531 4.292,1.833 1.198,0.302 10 false Twisted-pair Wire 2.865,2.156 4.458,2.521 1.594,0.365 10 false Differential Voltage Drive



c.

AVC-LAN communication consists of two communication lines (buses), bus+ and bus-. The system uses the differential voltage of the communication lines to determine the communication line level* and transmits a digital signal using an exclusive communication protocol (communication rules).

HINT:

*: The communication line level has a dominant level and a recessive level, and the AVC-LAN communication logically calculates the dominant level as "0" and the recessive level as "1".


Y210415E01
0.917,0.594 1.688,0.844 0.771,0.25 10 false Voltage [V] 0.073,2.823 1.063,3.229 0.99,0.406 10 false Communication Line Level 1.25,2.729 1.708,2.969 0.458,0.24 10 false Hi = 1 1.25,3.333 1.708,3.573 0.458,0.24 10 false Lo = 0 0.656,3.917 1.229,4.177 0.573,0.26 10 false : Bus + 0.656,4.333 1.229,4.573 0.573,0.24 10 false : Bus - 2.792,1.125 3.458,1.5 0.667,0.375 10 false Differential Voltage 4.958,1.125 5.625,1.5 0.667,0.375 10 false Differential Voltage 1.802,2.375 2.479,2.625 0.677,0.25 10 false Recessive 3.823,2.375 4.5,2.625 0.677,0.25 10 false Recessive 5.781,2.375 6.458,2.625 0.677,0.25 10 false Recessive 2.74,2.375 3.417,2.625 0.677,0.25 10 false Dominant 4.938,2.375 5.615,2.625 0.677,0.25 10 false Dominant


d.

AVC-LAN Communication Protocol (Communication Rules)

i.

The AVC-LAN communication system makes it possible to send data by offsetting the timing at which each device uses the communication line so that one communication line is shared by all parts that make up the network. In order to do so, communication is performed according to a communication protocol (communication rules) that is shared by the ECUs. This communication protocol helps communication be performed smoothly and securely.


ii.

The AVC-LAN communication protocol uses the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) protocol* as the rules for sending data via the communication line. This protocol allows all devices to share one communication line while retaining the right to start sending data.

HINT:

*: This is a type of communication access control where devices constantly detect the condition of the communication line and only send data when no other data is being sent. In addition, when the system detects that a data collision has occurred (data was simultaneously sent from another device), it waits for a certain period of time before resending the data.




e.

Signals sent and received via AVC-LAN communication are sent to the CAN bus via ECUs connected to the CAN bus.