Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › 2020.02–2020.11
NM37A0E _57 Power Source / Network _086694 NETWORKING _0419116 CAN COMMUNICATION SYSTEM(for HV Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with Toyota safety sense

*2: Models with parking support alert system

*3: Models with panoramic view monitor system

*4: Models with blind spot monitor system

*5: Models with seat position memory system

*6: Models with headup display system

*7: 4WD/AWD models

*8: Models with power back door system

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*1
Millimeter Wave Radar Sensor Assembly*1 Clearance Warning ECU Assembly*2
Parking Assist ECU*3 Blind Spot Monitor Sensor LH*4
Rear Television Camera Assembly*3 Hybrid Vehicle Control ECU
Vehicle Approaching Speaker Controller No. 1 Skid Control ECU (Brake Booster with Master Cylinder Assembly)
Combination Meter Assembly ECM
Tire Pressure Warning ECU and Receiver No. 2 Skid Control ECU (Brake Actuator Assembly)
Airbag Sensor Assembly Outer Mirror Control ECU Assembly RH*5
Steering Sensor Outer Mirror Control ECU Assembly LH*5
Power Steering ECU (Rack and Pinion Power Steering Gear Assembly) Certification ECU (Smart Key ECU Assembly)
Position Control ECU Assembly LH*5 Meter Mirror Sub-assembly*6
Inverter with Converter Assembly*7 Radio and Display Receiver Assembly
Main Body ECU (Multiplex Network Body ECU) Yawrate Sensor
Multiplex Network Door ECU*8 Air Conditioning Amplifier Assembly


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.