Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for Gasoline Model) › 2020.02–2020.11
NM37A0E _57 Power Source / Network _086694 NETWORKING _0419117 CAN COMMUNICATION SYSTEM(for Gasoline Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for Gasoline Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with Toyota safety sense

*2: Models with panoramic view monitor system

*3: Models with telematics transceiver

*4: Models with seat position memory system

*5: Models with headup display system

Central Gateway ECU (Network Gateway ECU) Forward Recognition Camera*1
Millimeter Wave Radar Sensor Assembly*1 Clearance Warning ECU Assembly
Parking Assist ECU*2 Blind Spot Monitor Sensor LH
Rear Television Camera Assembly*2 ECM
Telematics Transceiver*3 Radio and Display Receiver Assembly
4WD ECU Assembly Tire Pressure Warning ECU and Receiver
Steering Sensor Power Steering ECU (Rack and Pinion Power Steering Gear Assembly)
Skid Control ECU (Brake Actuator Assembly) Airbag Sensor Assembly
Outer Mirror Control ECU Assembly LH*4 Outer Mirror Control ECU Assembly RH*4
Position Control ECU Assembly LH*4 Air Conditioning Amplifier Assembly
Certification ECU (Smart Key ECU Assembly) Main Body ECU (Multiplex Network Body ECU)
Meter Mirror Sub-assembly*5 Multiplex Network Door ECU
Combination Meter Assembly -


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the GTS to the DLC3.


c.

For details, refer to the Repair Manual.