Home › Drivetrain › P810 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE SYSTEM
NM37A0E _52 Drivetrain _086679 P810 HYBRID TRANSMISSION / TRANSAXLE _0419687 HYBRID TRANSAXLE SYSTEM GE GENERAL F

P810 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A P810 hybrid vehicle transaxle is used.


b.

Containing the motor (MG2) for driving the vehicle and generator (MG1) for generating electrical power, this transaxle uses a continuously variable transmission mechanism with a compound gear unit that achieves smooth and quiet operation.


c.

This hybrid vehicle transaxle assembly consists primarily of a generator (MG1), motor (MG2), power split planetary gear unit, counter gear, final gear, differential gear unit and oil pump.


d.

By utilizing a pluriaxial configuration for the generator (MG1) and the motor (MG2), the overall length of the transaxle has been shortened. A compound gear that consists of the ring gear of the power split planetary gear, counter drive gear and parking lock gear is utilized to drastically reduce size and weight. By using high accuracy machining for the gear tooth surfaces, low-loss bearings and an oil sling type lubrication mechanism, driving losses have been reduced, resulting in improved fuel economy and reduced noise.


e.

This transaxle has a 4-shaft configuration. The power split planetary gear unit, an oil pump and generator (MG1) are provided on the main shaft. The MG2 reduction gear and motor (MG2) are provided on the 2nd shaft. The counter driven gear and the final drive gear are provided on the 3rd shaft. The final driven gear and the differential gear unit are provided on the 4th shaft.


f.

A differential pre-torque mechanism is used. Straightline stability and acceleration performance during periods of low load and low differential rotation when the vehicle is being driven normally are ensured.


g.

Lubrication for each gear is performed via the trochoid oil pump of the main shaft and final driven gear slinging up ATF. Through the use of a lubrication structure (oil sling type lubrication method) in which the gears sling up ATF, reduction of oil pump drive loss and enhanced transmission efficiency of the powertrain system have been achieved.


h.

To achieve high cooling performance in all driving condition, this transaxle also utilizes a water-cooled type oil cooler to which ATF is supplied by the trochoid oil pump, as well as an air-cooled type oil cooler to which ATF is supplied by the oil pump with motor assembly attached to the front side of engine/transaxle assembly.

X145417C01
2.083,2.167 2.25,2.167 2.25,2.167 3.042,2.552 true 3.385,5.313 3.969,5.313 true 4.417,4.906 4.917,5.49 4.917,5.49 5.25,5.49 true 4.396,3.406 5.729,4.406 5.729,4.406 5.979,4.406 true 4.115,2.792 5.646,3.542 5.646,3.542 5.979,3.542 true 4.396,2.135 5.646,2.635 5.646,2.635 5.979,2.635 true 4.229,1.927 5.646,2.25 5.646,2.25 5.958,2.25 true 4.208,1.25 5.656,1.594 5.656,1.594 5.938,1.594 true 4.438,1.115 5.948,1.115 true 4.427,1.052 5.667,0.573 5.667,0.573 5.917,0.573 true 4.031,1.094 5.688,0.177 5.688,0.177 5.938,0.177 true 2.031,0.26 2.198,0.26 2.198,0.26 3.333,0.99 true 2.073,1.125 2.24,1.125 2.24,1.125 2.698,1.469 true 1.854,0.188 2.167,0.344 0.313,0.156 10 false *1 1.906,2.094 2.219,2.25 0.313,0.156 10 false *3 3.219,5.229 3.531,5.385 0.313,0.156 10 false *4 5.323,5.396 5.635,5.552 0.313,0.156 10 false *e 6.042,4.323 6.354,4.479 0.313,0.156 10 false *5 6.031,3.458 6.344,3.615 0.313,0.156 10 false *6 6.042,2.552 6.354,2.708 0.313,0.156 10 false *7 6.031,2.156 6.354,2.323 0.323,0.167 10 false *8 6.01,1.51 6.323,1.667 0.313,0.156 10 false *9 6.021,1.021 6.313,1.198 0.292,0.177 10 false *f 5.979,0.5 6.281,0.667 0.302,0.167 10 false *10 5.99,0.094 6.292,0.26 0.302,0.167 10 false *11 1.75,1.5 2.063,1.656 0.313,0.156 10 false *a 1.698,2.521 2.01,2.677 0.313,0.156 10 false *b 1.771,3.146 2.083,3.302 0.313,0.156 10 false *c 2.792,4.521 3.104,4.677 0.313,0.156 10 false *d 1.875,1.042 2.188,1.198 0.313,0.156 10 false *2
*1 Generator (MG1) *2 Oil Pump
*3 Motor (MG2) *4 Final Driven Gear
*5 MG2 Reduction Gear *6 Final Drive Gear
*7 Counter Driven Gear *8 Planetary Ring Gear
*9 Power Split Planetary Gear Unit *10 Counter Drive Gear
*11 Parking Lock Gear - -
*a Main Shaft *b 3rd Shaft
*c 2nd Shaft *d 4th Shaft
*e Differential Gear Unit *f Compound Gear




SPECIFICATION


Hybrid Vehicle Transaxle

*1: Weight shows the figure with the fluid fully filled.

*2: The ratio of the combination of the counter and final gears.

Transaxle Type P810
Shift Position P / R / N / D / S
Fluid Type Toyota Genuine ATF WS
Fluid Capacity Liters (US qts, Imp. qts) 4.4 (4.6, 3.9)
Weight (Reference)*1 kg (lb) 111.8 (246.6)
Power Split Planetary Gear Unit No. of Sun Gear Teeth 30
No. of Pinion Gear Teeth 23
No. of Ring Gear Teeth 78
MG2 Reduction Gear No. of Drive Gear Teeth 17
No. of Driven Gear Teeth 49
Counter Gear No. of Drive Gear Teeth 56
No. of Driven Gear Teeth 49
Final Gear No. of Drive Gear Teeth 19
No. of Driven Gear Teeth 79
Total Speed Reduction Ratio*2 3.638