Home › Drivetrain › P810 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LOCK SYSTEM
NM37A0E _52 Drivetrain _086679 P810 HYBRID TRANSMISSION / TRANSAXLE _0419688 SHIFT LOCK SYSTEM CO CONTROL F

P810 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LOCK SYSTEM  CONTROL  SHIFT LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Shift Lock Control Unit Shift Lock Solenoid Locks the shift lever in P.
P Detection Switch Detects the shift lever in P.
Shift Lock Control ECU Controls the shift lock solenoid based on signals from each switch.
Shift Lock Release Button Manually overrides the shift lock mechanism.
Stop Light Switch Assembly Detects when the brake pedal is depressed.
Power Switch Detects the switch operation condition.
Certification ECU (Smart Key ECU Assembly) Sends the ignition switch signal to the shift lock control ECU.
Hybrid Vehicle Control ECU Sends the stop light switch assembly signal to the shift lock control ECU.


SYSTEM CONTROL


a.

The shift lock control ECU uses the P detection switch to detect the shift lever position, and receives input signals from the hybrid vehicle control ECU and ignition switch. Upon receiving these signals, the shift lock control ECU turns on the shift lock solenoid in order to release the shift lock.



FUNCTION


a.

Shift Lock Mechanism

i.

The shift lock mechanism prevents the shift lever from being moved to any position other than P, unless the ignition switch is ON or ON (READY) and the brake pedal is depressed. This mechanism helps prevent unintentional acceleration.


ii.

A shift lock release button, which manually overrides the shift lock mechanism, is used.