OUTLINE
The Q610 rear drive unit is used.
The Q610 rear drive unit contains a Motor Generator Rear (MGR), reduction gear and differential gear.
A differential pre-torque mechanism is used.
SPECIFICATION
|
*1: The ratio of the combination of the counter and final gears. *2: The figure shown is the weight with the fluid fully filled. |
||
| Counter Gear | No. of Drive Gear Teeth | 15 |
| No. of Driven Gear Teeth | 41 | |
| Differential Gear | No. of Differential Drive Gear Teeth | 18 |
| No. of Differential Ring Gear Teeth | 71 | |
| Total Speed Reduction Ratio*1 | 10.781 | |
| Fluid Type | Toyota Genuine ATF WS | |
| Fluid Capacity | Liters (US qts, Imp. qts) | 1.7 (1.8, 1.5) |
| Weight (Reference)*2 | kg (lb) | 41.1 (90.6) |