CONSTRUCTION
The electro magnetic control coupling sub-assembly consists of a front housing, main clutch, 4WD linear solenoid, armature, control clutch, cam, piston, ball and shaft.
The outer sides of the main clutch and control clutch are coupled with the front housing. The inner side of the main clutch is coupled with the shaft, and the inner side of the control clutch is coupled with the cam.
The control clutch is a multiple metal plate type, and the main clutch is a multiple wet plate type.
The electro magnetic control coupling sub-assembly is a non-disassembly type part. If replacing, replace the entire electro magnetic control coupling sub-assembly. Refer to the Repair Manual for details.
| *1 | Front Housing | *2 | Shaft |
| *3 | Piston | *4 | Armature |
| *5 | Cam | *6 | Ball |
| *7 | 4WD Linear Solenoid | *8 | Control Clutch |
| *9 | Main Clutch | - | - |
|
Propeller Shaft Side | - | - |
OPERATION
Not Operating
The drive force is transmitted from the propeller shaft to the front housing. When the 4WD linear solenoid is not operating, the drive force of the front housing is not transmitted to the shaft because the control clutch is not engaged. Accordingly, the drive force of the propeller shaft is not transmitted to the rear wheels.
| *1 | Front Housing | *2 | Shaft |
| *3 | Piston | *4 | Cam |
| *5 | 4WD ECU Assembly | *6 | 4WD Linear Solenoid |
| *7 | Control Clutch | *8 | Armature |
| *9 | Main Clutch | - | - |
Operating
When the 4WD ECU assembly energizes the 4WD linear solenoid, it attracts the armature to the control clutch side. This causes the control clutch to engage and the cam to rotate.
The rotational movement of the cam causes the piston to push on the main clutch, causing the main clutch to engage. Accordingly, the drive force of the propeller shaft is transmitted to the rear wheels.
| *1 | Front Housing | *2 | Shaft |
| *3 | Piston | *4 | Cam |
| *5 | 4WD ECU Assembly | *6 | 4WD Linear Solenoid |
| *7 | Control Clutch | *8 | Armature |
| *9 | Main Clutch | - | - |
| *a | High Amperage | *b | Low Amperage |
The amount of drive force that is transmitted to the rear wheels is controlled steplessly by controlling the amperage that is applied to the 4WD linear solenoid.
| *1 | 4WD ECU Assembly | - | - |
| *a | Control Clutch Engagement Force: Small | *b | Piston Travel Distance |
| *c | Main Clutch Engagement Force: Small | - | - |
| *1 | 4WD ECU Assembly | - | - |
| *a | Control Clutch Engagement Force: Large | *b | Piston Travel Distance |
| *c | Main Clutch Engagement Force: Large | - | - |