Home › Drivetrain › TRANSFER / 4WD / AWD › DYNAMIC TORQUE CONTROL AWD SYSTEM
NM37A0E _52 Drivetrain _086681 TRANSFER / 4WD / AWD _0419690 DYNAMIC TORQUE CONTROL AWD SYSTEM GE GENERAL F

TRANSFER / 4WD / AWD  DYNAMIC TORQUE CONTROL AWD SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A GF2A type transfer that is compact and lightweight is used on FD15ED type rear differential models.


b.

A dynamic torque control AWD system is used.


c.

The dynamic torque control AWD system is a compact, lightweight and high performance AWD system that optimally controls the torque distribution to the front and rear wheels using a electro magnetic control coupling sub-assembly in the rear differential.


d.

The disconnect mechanism connects the driveline when the vehicle starts off, allowing the vehicle to drive under tough conditions in AWD. Also, when the vehicle speed increases and a stable driving condition is achieved, it disconnects the driveline to help improve fuel efficiency.


e.

The AWD system performs control in cooperation with the brake control system. The 4WD ECU assembly controls the drive torque distribution to the front and rear wheels in accordance with information received from the skid control ECU. These controls ensure a smooth acceleration and driving stability.


f.

Multi-terrain select is used. When the driver performs a switch operation to select an appropriate mode for the road conditions, vehicle control switches to the optimal control for the road conditions. As a result, optimal driving performance is maintained, achieving superior off-road driveability.



SPECIFICATION


Transfer Type GF2A
Gear Type Hypoid Gear
Gear Ratio 0.435
Transfer Ring Gear No. of Teeth 39
Transfer Driven Pinion Gear No. of Teeth 17
Oil Type and Viscosity Toyota Genuine Differential Gear Oil LX
Oil Capacity Liters (US qts, Imp. qts) 0.39 (0.41, 0.35)
Weight (Reference) kg (lb) 15.4 (34.1)


MAIN FEATURES


a.

Dynamic Torque Control AWD System Characteristics

Feature Outline
Traction Performance Achieves stable start-off and acceleration performance.
Driving Stability Performance Achieves stable cornering performance.
Fuel Economy Achieves better fuel economy by transmitting drive torque to the rear wheels when needed, in the amount needed.


b.

Multi-terrain Select AWD Control and Drive Force Distribution

Multi-terrain Select AWD Control Vehicle Speed
0 km/h to 25 km/h (0 mph to 16 mph) 25 km/h to 40 km/h (16 mph to 25 mph) 40 km/h (25 mph) or more
MUD & SAND Front/rear distribution Control equivalent to directly connected AWD (Maximum drive force distribution of 50:50) Normal control
NORMAL Front/rear distribution Normal control
ROCK & DIRT Front/rear distribution Control equivalent to directly connected AWD (Maximum drive force distribution of 50:50) Normal control


c.

Front/Rear Drive Force Distribution

i.

Drive force distribution to the front and rear is optimized according to various driving conditions. The disconnect mechanism stops the rotation of driveline parts (such as the propeller shaft) during constant-speed cruising, helping improve fuel efficiency. When AWD driving is necessary, the mechanism quickly connects the parts to achieve stable AWD performance.

X145585C01
1.146,0.667 1.844,0.917 0.698,0.25 10 false *1 3.26,0.667 3.938,0.938 0.677,0.271 10 false *1 2.219,0.656 2.729,0.938 0.51,0.281 10 false *2 4.604,0.667 6.24,1.771 1.635,1.104 10 false *3 6.094,0.667 6.99,1.781 0.896,1.115 10 false *4 1.167,2.948 1.792,3.25 0.625,0.302 10 false *5 2.208,2.917 2.927,3.146 0.719,0.229 10 false *6 3.323,2.927 4.438,3.625 1.115,0.698 10 false *7 4.625,2.906 5.729,3.229 1.104,0.323 10 false *8 6.073,2.938 6.969,3.26 0.896,0.323 10 false *9 0.396,1.365 1.094,1.615 0.698,0.25 10 false *a
*1 Connect *2 Disconnect
*3 Connected to Disconnected *4 Disconnected to Connected
*5 Starting Off *6 Constant-speed Cruising
*7 Variable Road except On Road (Mud, Snow, Sand etc...) *8 Acceleration to Normal Driving
*9 Deceleration to Stopped - -
*a Front/Rear Drive Force Distribution - -