OUTLINE
Front Axle
A compact and highly rigid double-row angular ball bearing is used on the front axle. The double-row angular ball bearing and the axle hub have been integrated to ensure high rigidity.
The speed sensor rotor is integrated in the bearing inner race.
A 12-point lock nut is used and staked in order to ensure that the front axle hub is properly tightened. Once removed, this nut cannot be reused.
| *1 | Double-row Angular Ball Bearing | *2 | Speed Sensor Rotor |
| *3 | Lock Nut (12-point) | *4 | Front Axle Hub |
Do not place magnetized objects close to the surface of the sensor rotor.
Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.
Rear Axle
A compact and highly rigid double-row angular ball bearing is used on the rear axle. The double-row angular ball bearing and the axle hub have been integrated to ensure high rigidity.
The speed sensor rotor is integrated in the bearing inner race.
A 12-point lock nut is used on the 4WD/AWD models and staked in order to ensure that the rear axle hub is properly tightened. Once removed, this nut cannot be reused.
| *1 | Speed Sensor Rotor | *2 | Speed Sensor |
| *3 | Rear Axle Hub | *4 | Double-row Angular Ball Bearing |
| *1 | Double-row Angular Ball Bearing | *2 | Speed Sensor Rotor |
| *3 | Rear Axle Hub | *4 | Lock Nut (12-point) |
Do not place magnetized objects close to the surface of the sensor rotor.
Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.