CONSTRUCTION
A separate input construction type upper support is used. A structure where input from the front coil spring and front spring bumper is directly transmitted to the body is used, reducing vertical bouncing and ensuring high quality riding comfort.
The front suspension support sub-assembly uses a floating island structure for the upper surface, reducing noise generated from surfaces touching the body.
By attaching rubber seals to the upper surface of the front suspension support sub-assembly, intrusion of water, mud, etc. into the engine compartment has been reduced.*
*: Models for Russia
The strut mounting bearing uses a metallic ball bearing structure, and the rotation axis is on the same axis as the king pin axis. As a result, this reduces the moment around the king pin axis and reduces left and right differences in the steering force. Strut mounting bearing prying is removed, improving the steering feel. Furthermore, reducing the moment around the king pin axis and removing strut mounting bearing prying also reduces vehicle drifting caused by external factors such as road banks, ensuring straightline stability.
The shape of the front spring bumper is optimized, reducing the initial spring constant when warping, and reducing shock when riding over height differences, etc. Reducing rigidity changes also changes the spring constant at which linear rise up occurs, achieving smooth posture changes during turning.
| *A | Models for Russia | - | - |
| *1 | Front Suspension Support Sub-assembly | *2 | Strut Mounting Bearing |
| *3 | Front Spring Bumper | *4 | Rubber Seal |
| *a | Strut Mounting Bearing Rotation Axis and King Pin Axis | *b | Floating Island Structure |