CONSTRUCTION
A low-pressure (N2) gas sealed front shock absorber assembly with built-in rebound spring is used.
When the stroke is small during normal driving, the rebound spring does not operate, keeping the suspension soft. When the inner wheel rebound is larger (such as during turning), the rebound spring is operated to reduce elongation of the suspension, ensuring roll rigidity. As a result, riding comfort is ensured while also achieving excellent maneuverability and stability.
A valve that ensures damping force even in the very low-speed range is used. As a result, damping is securely performed from a very small range, ensuring responsiveness while achieving a flat and high quality riding comfort with good suppression and reduced large shocks.
In consideration of preventing road noise, a spring seat with an integrated mass damper is used.
| *1 | Oil Seal | *2 | Rod Guide Bush |
| *3 | Absorber Rod | *4 | Rebound Spring |
| *5 | Piston Valve | *6 | Base Valve |
| *7 | Oil | *8 | Low-pressure (N2) Gas |
| *9 | Friction Control Device (FCD) | *10 | Spring Seat |
| *a | Mass Damper Part | - | - |
To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure (N2) gas sealed in the front shock absorber assembly. For details, refer to the Repair Manual.
A friction control device (FCD) has been adopted, which improves the flat driving feel and reduces vibration in the high frequency range, realizing excellent ride comfort.
| *1 | Absorber Rod | *2 | Oil Seal |
| *3 | Friction Control Device (FCD) | - | - |