CONSTRUCTION
A high rigidity and lightweight hollow front stabilizer bar is used. The installation position is optimized, improving roll rigidity. As a result, rolling is suppressed during turning, achieving a stable turning posture.
A ball joint is used at both ends of the front stabilizer link assembly.
An adhesive stabilizer bar bush is used to adhere the stabilizer bar bush to the front stabilizer bar. By adhering the stabilizer bar bush to the front stabilizer bar, friction of the sliding part is reduced resulting in suspension which moves easily in response to input from the road surface.
By using a saddle shaped bracket to suppress openings in the rubber part caused by input from the road surface, and by using adhesive stabilizer bar bushes, foreign matter such as dirt and sand are prevented from entering.
By using an integrated internal aluminum seat for the stabilizer bar bush and abolishing the lower bracket, a stabilizer bar bush with an equal bound and rebound spring rate has been achieved which results in excellent roll feeling.
| *1 | Front Stabilizer Link Assembly | *2 | Front Stabilizer Bar |
| *3 | Stabilizer Bar Bush | - | - |
| *a | Cross Section | *b | Saddle Shape |
| *c | Aluminum Seat | - | - |