CONSTRUCTION
By using pig tail type rear coil springs, optimal suspension stroke is ensured.
A low-pressure (N2) gas sealed rear shock absorber assembly is used.
To achieve both body control when driving on smooth roads and good ride comfort when driving on rough roads, a valve which ensures sufficient and responsive damping force at low shock absorber speeds and reduced damping force at high shock absorber speeds is used, resulting in a reduction of large shocks and ensuring stability and high quality ride comfort.
| *1 | Rear Coil Spring | *2 | Oil Seal |
| *3 | Rod Guide Bush | *4 | Absorber Rod |
| *5 | Piston Valve | *6 | Base Valve |
| *7 | Oil | *8 | Low-pressure (N2) Gas |
| *9 | Friction Control Device (FCD) | - | - |
To prevent hazardous conditions, make sure to empty the gas from the rear shock absorber assembly before discarding the low-pressure (N2) gas sealed in the rear shock absorber assembly. For details, refer to the Repair Manual.
A friction control device (FCD) has been adopted, which improves the flat driving feel and reduces vibration in the high frequency range, realizing excellent ride comfort.
| *1 | Absorber Rod | *2 | Oil Seal |
| *3 | Friction Control Device (FCD) | - | - |