CONSTRUCTION
Bushes are used for the moving parts of all arms, reducing input for high frequencies. The inner/outer cylindrical shape is also optimized, reducing friction when the suspension shakes. As a result, input from the road surface is mitigated, achieving high quality riding comfort.
By optimizing the thickness and shape of the rear upper control arm assembly, high rigidity and weight reduction have been achieved.
The rear No. 1 suspension arm assembly utilizes hollow construction to achieve high rigidity and reduced weight.
Welding reinforcement is optimized for the rear No. 2 suspension arm assembly, achieving high rigidity and weight reduction.
| *a | Cross Section of Rear Upper Control Arm Assembly | *b | Cross Section of Rear No. 1 Suspension Arm Assembly |
| *c | Cross Section of Rear Trailing Arm Assembly | *d | Cross Section of Rear No. 2 Suspension Arm Assembly |