CONSTRUCTION
A rear stabilizer bar with an optimized spring constant is used, achieving both driving stability and riding comfort.
A ball joint is used on the rear stabilizer bar side of the rear stabilizer link assembly. A rear stabilizer bush is used on the rear No. 2 suspension arm assembly side. The rear No. 2 suspension arm assembly is reinforced by the inner cylinder of the rear stabilizer bush, helping reduce the weight of the rear No. 2 suspension arm assembly.
A rear stabilizer bush with an inter-ring is used to improve rigidity perpendicular to the axis of the rear stabilizer bush. Teflon liner is applied to areas that contact the rear stabilizer bar, reducing sliding friction. As a result, high driving stability and high quality riding comfort are achieved.
| *1 | Rear Stabilizer Link Assembly | *2 | Rear Stabilizer Bush |
| *3 | Rear Stabilizer Bar | *4 | Inter-ring |
| *5 | Teflon Liner | - | - |
| *a | A-A Cross Section | - | - |