CONSTRUCTION
Combination Meter Assembly
When the certification ECU (smart key ECU assembly) detects an abnormality with the entry and start system, a message appears on the multi-information display. If the hybrid system is stopped in this state, it might not be possible to restart it.
| *A | Models with 4.2 Inch
Multi-information Display |
*B | Models with 7 Inch
Multi-information Display |
| *1 | Combination Meter Assembly | - | - |
| *a | Multi-information Display | *b | Power Source State (ACC) |
| *c | Power Source State (IG) | *d | Key Warning Light |
| Displayed Item | Power Source Condition |
|---|---|
| - | Either of the following conditions is met:
·
The hybrid system has started. ·
The power source is turned off. |
| ACCESSORY | ACC state |
| IGNITION ON | ON state (the hybrid system is not started.) |
| Key Warning Light | Hybrid system start ready state* |
*: The shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).