Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for HV Model) › 2020.02–2020.11
NM37A0E _58 Vehicle Interior _088156 THEFT DETERRENT / KEYLESS ENTRY _0420652 ENTRY AND START SYSTEM(for HV Model) GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for HV Model)  GENERAL  GENERAL  


OUTLINE


a.

The entry and start system has the following main functions, making it a very user-friendly system.

Function Outline
Start Function The start function is operated by simply pushing the power switch while carrying the electrical key transmitter sub-assembly. When the power switch is pushed, the certification ECU turns the ACC relay, IG1 relay and IG2 relay on or off to switch the power source.*
·

The power source changes depending on the depression of the brake pedal and the shift position.


Immobiliser The immobiliser system compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly.
Steering Wheel Lock The steering wheel lock function is operated to lock and unlock the steering wheel by using a lock/unlock mechanism in the steering column assembly.
Entry Function Entry Unlock:
The doors unlock when the outside door handle is gripped.
·

The driver door outside door handle unlocks all doors.

·

The passenger door outside door handle unlocks all doors.


Entry Lock:
All doors lock when the lock sensor on an outside door handle is touched or back door opener switch assembly (back door lock switch) is pressing.
Entry Back Door Open The entry back door open function can be operated manually by simply pressing the back door opener switch assembly (back door unlock switch).
Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors and the back door at a distance. The basic operation is the same as that of the wireless door lock control system.

HINT:

*: In this chapter, the expression "power source" has been used in some locations to allow precise explanations. The power source condition is also expressed using conventional expressions such as "ignition switch off", "ignition switch ACC" and "ignition switch ON".