Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM › 2020.02–2020.11
NM37A0E _59 Vehicle Exterior _088216 DOOR / HATCH _0420773 POWER BACK DOOR SYSTEM CO CONTROL F

DOOR / HATCH  POWER BACK DOOR SYSTEM  CONTROL  POWER BACK DOOR CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Power Back Door ECU (Multiplex Network Door ECU)
·

Controls the power back door system in accordance with the signals received from the switches, sensors and ECUs.

·

Receives the signals from the Hall IC to detect the back door position and the opening and closing speed of the back door.

·

Informs the user by sounding the buzzer and flashing the hazard warning light when each operation switch is pressed.


Power Back Door Unit Assembly Set Back Door Drive Motor Opens and closes the back door when actuated by the power back door ECU (multiplex network door ECU).
Hall IC Detects the operation conditions of the back door and outputs a pulse signal to the power back door ECU (multiplex network door ECU).
Back Door Lock with Courtesy light Switch Assembly Back Door Closer Motor Latches and unlatches the back door when actuated by the power back door ECU (multiplex network door ECU).
Latch Switch Detects if the back door is ajar.
Position Switch Detects the initial (neutral) position of the driven gear of the back door lock motor. This switch turns on when the driven gear is in the neutral position and turns off when the driven gear is in any position other than neutral.
Back Door Courtesy Switch Detects whether the back door is open or closed. This switch turns on when the back door is open or ajar and turns off when the back door is closed.
No. 1 Power Back Door Control Switch The power back door closes when the No. 1 power back door control switch (on the back door jamb) is turned on.
Back Door Opener Switch Assembly
·

The back door opens when the back door opener switch assembly on the outside of the vehicle is turned on.

·

Outputs signals to the certification ECU (smart key ECU assembly).


Power Back Door Control Switch
·

The back door opens and closes when the power back door control switch is turned on.

·

Outputs signals to the power back door ECU (multiplex network door ECU).


Touch Sensor (Power Back Door Sensor Assembly) Detects if an object is jammed in the back door during the closing operation of the back door.
Power Back Door Warning Buzzer When the power back door system starts to operate, the power back door warning buzzer sound to inform the user that the system is operating.
Combination Meter Assembly
·

Receives a signal to blink the hazard warning light.

·

Outputs a customization signal to the main body ECU (multiplex network body ECU).


Electrical Key and Tire Pressure Warning ECU and Receiver Receives the power back door button signal and transmits it to the certification ECU (smart key ECU assembly).
Main Body ECU (Multiplex Network Body ECU) Sends a back door lock/unlock control signal, vehicle speed signal and shift position P signal to the power back door ECU via the Controller Area Network (CAN).
Electrical Key Transmitter Sub-assembly
·

Power Back Door Button


Sends the power back door button signal to the electrical key and tire pressure warning ECU and receiver.


SYSTEM CONTROL


a.

The power back door opener function operates when all of the following conditions are met:

i.

The power back door system is on.


ii.

The back door is unlocked.


iii.

The vehicle speed is approximately 3 km/h (2 mph) or less (only when the ignition switch is ON).


iv.

The brake pedal is depressed, the shift position is in P or the parking brake is on (only when the ignition switch is ON).



b.

The power back door closer function operates when all of the following conditions are met:

i.

The power back door system is on.


ii.

The vehicle speed is approximately 3 km/h (2 mph) or less (only when the ignition switch is ON).


iii.

The brake pedal is depressed, the shift position is in P or the parking brake is on (only when the ignition switch is ON).



c.

Opener Function 1

i.

When the power back door control switch or the power back door button of the electrical key transmitter sub-assembly is operated, the opener function operates as follows:

*: Models with Power Back Door Hazard Warning Light

1 After the power back door control switch or the power back door button of the electrical key transmitter sub-assembly is pressed for approximately 0.8 seconds, the power back door buzzer sounds for 0.8 seconds and the hazard warning light blinks twice*.
2 The back door lock with courtesy light switch assembly (back door closer motor) releases the latch.
3 The back door courtesy switch is turned on and the motor in the power back door unit assembly set starts to operate.
4 The back door closer motor is returned to the initial position and the latch switch is turned on.
5 After the power back door ECU detects a back door stop position pulse, the motor in the power back door unit assembly set is stopped.

Y188216E08
0.26,0.74 1.833,1.521 1.573,0.781 10 false Power Back Door Control Switch or Power Back Door Button 3.792,0.365 5.688,0.646 1.896,0.281 10 false Approximately 0.8 Seconds 2.115,0.594 2.438,0.802 0.323,0.208 10 false ON 2.073,1.188 2.396,1.396 0.323,0.208 10 false OFF 0.333,3.219 1.896,3.594 1.563,0.375 10 false Back Door Closer Motor 0.375,1.979 2.031,2.302 1.656,0.323 10 false Power Back Door Buzzer 1.021,4.323 2.115,4.656 1.094,0.333 10 false Latch Switch 0.125,5.302 1.854,5.688 1.729,0.385 10 false Back Door Courtesy Switch 0.563,6.208 1.99,6.865 1.427,0.656 10 false Power Back Door Unit Assembly Set (Motor) 0.458,7.427 1.969,7.823 1.51,0.396 10 false Hazard Warning Lights 0.719,8.167 2.073,8.469 1.354,0.302 10 false Back Door Condition 2.063,2.271 2.385,2.479 0.323,0.208 10 false OFF 2.125,1.698 2.448,1.906 0.323,0.208 10 false ON 1.927,2.792 2.344,3 0.417,0.208 10 false Close 1.813,3.604 2.344,3.865 0.531,0.26 10 false Release 2.094,4.042 2.417,4.25 0.323,0.208 10 false ON 2.042,4.635 2.365,4.844 0.323,0.208 10 false OFF 2.042,5.01 2.365,5.219 0.323,0.208 10 false ON 2.01,5.552 2.333,5.76 0.323,0.208 10 false OFF 2.031,6.719 2.354,6.927 0.323,0.208 10 false OFF 2.104,7.146 2.427,7.354 0.323,0.208 10 false ON 2.031,7.729 2.354,7.938 0.323,0.208 10 false OFF 2.635,8.156 3.156,8.385 0.521,0.229 10 false Closed 3.458,8.156 3.938,8.365 0.479,0.208 10 false Ajar 6.125,8.177 6.604,8.385 0.479,0.208 10 false Open 4.167,1.448 6.063,1.729 1.896,0.281 10 false Approximately 0.8 Seconds 2.083,5.906 2.406,6.115 0.323,0.208 10 false ON 3.333,7.073 3.49,7.271 0.156,0.198 10 false * 3.625,7.073 3.781,7.271 0.156,0.198 10 false * 0.104,8.552 3.521,8.865 3.417,0.313 10 false *: Models with Power Back Door Hazard Warning Light



d.

Opener Function 2

i.

When the back door opener switch assembly is operated, the opener function operates as follows:

*: Models with Power Back Door Hazard Warning Light

1 After the back door opener switch assembly is pressed, the power back door buzzer sounds for 0.8 seconds and the hazard warning light blinks twice*.
2 The back door lock with courtesy light switch assembly (back door closer motor) releases the latch.
3 The back door courtesy switch is turned on and the motor in the power back door unit assembly set starts to operate.
4 The back door closer motor is returned to the initial position and the latch switch is turned on.
5 After the power back door ECU detects a back door stop position pulse, the motor in the power back door unit assembly set is stopped.

Y188217E07
0.229,0.958 1.844,1.51 1.615,0.552 10 false Back Door Opener Switch Assembly 1.99,0.729 2.323,0.927 0.333,0.198 10 false ON 4.125,1.417 5.885,1.698 1.76,0.281 10 false Approximately 0.8 seconds 1.938,1.229 2.25,1.417 0.313,0.188 10 false OFF 2.01,1.646 2.344,1.844 0.333,0.198 10 false ON 0.25,3.177 1.802,3.521 1.552,0.344 10 false Back Door Closer Motor 1.927,2.354 2.24,2.542 0.313,0.188 10 false OFF 1.708,3.604 2.24,3.813 0.531,0.208 10 false Release 0.25,1.948 1.854,2.26 1.604,0.313 10 false Power Back Door Buzzer 2,4.948 2.333,5.146 0.333,0.198 10 false ON 0.917,4.24 1.99,4.521 1.073,0.281 10 false Latch Switch 1.938,4.51 2.25,4.698 0.313,0.188 10 false OFF 2.01,4.021 2.344,4.219 0.333,0.198 10 false ON 1.927,5.427 2.24,5.615 0.313,0.188 10 false OFF 1.948,6.5 2.26,6.688 0.313,0.188 10 false OFF 1.969,6.917 2.302,7.115 0.333,0.198 10 false ON 1.948,7.417 2.26,7.604 0.313,0.188 10 false OFF 0.167,5.177 1.885,5.688 1.719,0.51 10 false Back Door Courtesy Switch 0.448,6 1.885,6.635 1.438,0.635 10 false Power Back Door Unit Assembly Set (Motor) 0.417,7.167 1.844,7.563 1.427,0.396 10 false Hazard Warning Lights 0.646,7.896 1.979,8.198 1.333,0.302 10 false Back Door Condition 2.615,7.875 3.146,8.094 0.531,0.219 10 false Closed 3.604,7.875 4.063,8.063 0.458,0.188 10 false Ajar 6.26,7.875 6.667,8.135 0.406,0.26 10 false Open 1.854,2.781 2.24,3 0.385,0.219 10 false Close 2.021,5.771 2.354,5.969 0.333,0.198 10 false ON 3.26,6.854 3.417,7.052 0.156,0.198 10 false * 3.573,6.854 3.729,7.052 0.156,0.198 10 false * 0.094,8.458 3.479,8.865 3.385,0.406 10 false *: Models with Power Back Door Hazard Warning Light



e.

Opener Function 3

i.

When the power back door control switch or power back door button of the electrical key transmitter sub-assembly is operated, the opener function operates as follows:

*: Models with Power Back Door Hazard Warning Light

1 When the power back door control switch or power back door button of the electrical key transmitter sub-assembly is pressed while the back door is closing, the power back door buzzer sounds for approximately 0.2 seconds and the back door stops.
2 When the power back door control switch or power back door button of the electrical key transmitter sub-assembly is pressed for approximately 0.8 seconds again, the power back door buzzer sounds for approximately 0.8 seconds and the hazard warning lights flashes 2 times*.
3 The motor in the power back door unit assembly set starts to operate.
4 The power back door ECU detects a back door stop position pulse and the motor in the power back door unit assembly set stops.

Y248495E02
2.917,1.271 2.917,0.344 2.917,0.344 2.771,0.344 true 0.208,0.938 1.802,1.698 1.594,0.76 10 false Power Back Door Control Switch or Power Back Door Button 0.208,2.177 1.969,2.625 1.76,0.448 10 false Power Back Door Buzzer 0.385,3.813 1.823,4.417 1.438,0.604 10 false Power Back Door Unit Assembly Set (Motor) 0.417,4.948 1.792,5.479 1.375,0.531 10 false Hazard Warning Light 1.063,0.229 2.938,0.552 1.875,0.323 10 false Approximately 0.8 seconds 2,0.896 2.333,1.083 0.333,0.188 10 false On 2,1.396 2.333,1.583 0.333,0.188 10 false Off 2,2.531 2.333,2.719 0.333,0.188 10 false Off 2,1.823 2.333,2.01 0.333,0.188 10 false On 2,4.281 2.333,4.469 0.333,0.188 10 false Off 2,3.573 2.333,3.76 0.333,0.188 10 false On 2,5.229 2.333,5.417 0.333,0.188 10 false Off 2,4.729 2.333,4.917 0.333,0.188 10 false On 0.563,5.729 1.938,6.26 1.375,0.531 10 false Back Door Condition 2.375,5.729 3.75,6.26 1.375,0.531 10 false Stop Position 6.031,5.729 6.563,5.917 0.531,0.188 10 false Open 4.219,2.01 5.927,2.219 1.708,0.208 10 true Approximately 0.8 seconds 3.49,4.656 3.646,4.854 0.156,0.198 10 false * 3.813,4.656 3.969,4.854 0.156,0.198 10 false * 0.125,6.438 3.531,6.844 3.406,0.406 10 false *: Models with Power Back Door Hazard Warning Light



f.

Opener Function 4

i.

When the No. 1 power back door control switch is operated, the opener function operates as follows:

*: Models with Power Back Door Hazard Warning Light

1 When the No. 1 power back door control switch is pressed while the back door is closing, the power back door buzzer sounds for approximately 0.2 seconds and the back door stops.
2 When the No. 1 power back door control switch is pressed again, the power back door buzzer sounds for approximately 0.8 seconds and the hazard warning lights flashes 2 times*.
3 The motor in the power back door unit assembly set starts to operate.
4 The power back door ECU detects a back door stop position pulse and the motor in the power back door unit assembly set stops.

Y248496E02
0.208,1.031 1.688,1.792 1.479,0.76 10 false No. 1 Power Back Door control switch 0.208,2.177 1.969,2.625 1.76,0.448 10 false Power Back Door Buzzer 0.385,3.813 1.823,4.417 1.438,0.604 10 false Power Back Door Unit Assembly Set (Motor) 0.417,4.948 1.792,5.479 1.375,0.531 10 false Hazard Warning Light 2,0.896 2.333,1.083 0.333,0.188 10 false On 2,1.396 2.333,1.583 0.333,0.188 10 false Off 2,2.531 2.333,2.719 0.333,0.188 10 false Off 2,1.823 2.333,2.01 0.333,0.188 10 false On 2,4.281 2.333,4.469 0.333,0.188 10 false Off 2,3.573 2.333,3.76 0.333,0.188 10 false On 2,5.229 2.333,5.417 0.333,0.188 10 false Off 2,4.729 2.333,4.917 0.333,0.188 10 false On 0.563,5.729 1.938,6.26 1.375,0.531 10 false Back Door Condition 2.375,5.729 3.75,6.26 1.375,0.531 10 false Stop Position 6.031,5.729 6.563,5.917 0.531,0.188 10 false Open 4.219,2.01 5.927,2.219 1.708,0.208 10 true Approximately 0.8 seconds 3.49,4.656 3.646,4.854 0.156,0.198 10 false * 3.813,4.656 3.969,4.854 0.156,0.198 10 false * 0.135,6.448 3.49,6.813 3.354,0.365 10 false *: Models with Power Back Door Hazard Warning Light



g.

Closer Function 1

i.

When the power back door control switch or the power back door button of the electrical key transmitter sub-assembly is operated, the closer function operates as follows:

*: Models with Power Back Door Hazard Warning Light

1 After the power back door control switch or the power back door button of the electrical key transmitter sub-assembly is pressed for approximately 0.8 seconds, the power back door buzzer sounds for 0.8 seconds and the hazard warning light blinks twice*.
2 The motor in the power back door unit assembly set starts to operate.
3 When the latch switch is turned off, the voltage of the motor is reduced.
4 The back door lock with courtesy light switch assembly (back door closer motor) performs the closing operation 1 second after the latch switch is turned off, and stops the operation when the back door courtesy switch is turned off.

Y188219E08
0.063,0.604 1.802,1.354 1.74,0.75 10 false Power Back Door Control Switch or Power Back Door Button 0.094,1.604 1.698,1.958 1.604,0.354 10 false Power Back Door Buzzer 0.094,2.667 1.667,3.021 1.573,0.354 10 false Back Door Closer Motor 0.771,3.646 1.844,3.906 1.073,0.26 10 false Latch Switch 0.823,4.427 1.656,4.75 0.833,0.323 10 false Pawl Switch 0.063,5.219 1.813,5.677 1.75,0.458 10 false Back Door Courtesy Switch 0.271,6.021 1.688,6.76 1.417,0.74 10 false Power Back Door Unit Assembly Set (Motor) 0.281,7.156 1.781,7.469 1.5,0.313 10 false Hazard Warning Lights 0.438,7.844 1.802,8.094 1.365,0.25 10 false Back Door Condition 2.438,7.833 2.854,8.031 0.417,0.198 10 false Open 5.146,7.844 5.563,8.042 0.417,0.198 10 false Ajar 6.104,7.844 6.583,8.063 0.479,0.219 10 false Closed 1.802,7.406 2.219,7.604 0.417,0.198 10 false OFF 1.854,6.958 2.271,7.156 0.417,0.198 10 false ON 1.802,6.531 2.219,6.729 0.417,0.198 10 false OFF 1.781,5.458 2.198,5.656 0.417,0.198 10 false OFF 1.854,5.01 2.271,5.208 0.417,0.198 10 false ON 1.802,4.656 2.219,4.854 0.417,0.198 10 false OFF 1.865,4.208 2.281,4.406 0.417,0.198 10 false ON 1.802,3.875 2.219,4.073 0.417,0.198 10 false OFF 1.865,3.448 2.281,3.646 0.417,0.198 10 false ON 1.573,2.99 2.125,3.198 0.552,0.208 10 false Release 1.719,2.344 2.146,2.542 0.427,0.198 10 false Close 1.813,1.833 2.229,2.031 0.417,0.198 10 false OFF 1.813,0.958 2.229,1.156 0.417,0.198 10 false OFF 1.854,1.396 2.24,1.604 0.385,0.208 10 false ON 1.875,0.448 2.26,0.656 0.385,0.208 10 false ON 3.458,0.146 5.281,0.438 1.823,0.292 10 false Approximately 0.8 Seconds 1.865,5.75 2.281,5.948 0.417,0.198 10 false ON 3.875,1.125 5.698,1.417 1.823,0.292 10 false Approximately 0.8 Seconds 3.146,1.979 4.781,2.208 1.635,0.229 10 false Approximately 1.0 Second 3.021,6.865 3.177,7.063 0.156,0.198 10 false * 3.323,6.865 3.479,7.063 0.156,0.198 10 false * 0.104,8.479 3.448,8.865 3.344,0.385 10 false *: Models with Power Back Door Hazard Warning Light



h.

Closer Function 2

i.

When the No. 1 power back door control switch is operated, the closer function operates as follows:

*: Models with Power Back Door Hazard Warning Light

1 When the No. 1 power back door control switch is turned on, the power back door buzzer sounds for 0.8 seconds and the hazard warning light blinks twice*.
2 The motor in the power back door unit assembly starts to operate.
3 When the latch switch is turned off, the voltage of the motor is reduced.
4 The back door lock with courtesy light switch assembly (back door closer motor) performs the closing operation 1 second after the latch switch is turned off, and stops the operation when the back door courtesy switch is turned off.

Y188220E08
0.104,0.583 1.573,1.031 1.469,0.448 10 false No. 1 Power Back Door Control Switch 3.427,0.146 5.281,0.448 1.854,0.302 10 false Approximately 0.8 Seconds 0.135,1.573 1.74,1.885 1.604,0.313 10 false Power Back Door Buzzer 0.115,2.688 1.615,3.021 1.5,0.333 10 false Back Door Closer Motor 0.813,3.719 1.948,4 1.135,0.281 10 false Latch Switch 0.906,4.448 1.76,4.74 0.854,0.292 10 false Pawl Switch 0.042,5.25 1.74,5.667 1.698,0.417 10 false Back Door Courtesy Switch 0.25,6.125 1.646,6.708 1.396,0.583 10 false Power Back Door Unit Assembly (Motor) 0.281,7.198 1.729,7.51 1.448,0.313 10 false Hazard Warning Lights 0.583,7.927 1.948,8.219 1.365,0.292 10 false Back Door Condition 2.635,7.958 3.115,8.167 0.479,0.208 10 false Open 5.208,7.948 5.688,8.156 0.479,0.208 10 false Ajar 5.99,7.938 6.469,8.146 0.479,0.208 10 false Closed 1.792,7.417 2.271,7.625 0.479,0.208 10 false OFF 1.844,6.958 2.323,7.167 0.479,0.208 10 false ON 1.781,6.542 2.26,6.75 0.479,0.208 10 false OFF 1.802,5.427 2.281,5.635 0.479,0.208 10 false OFF 1.854,5.031 2.333,5.24 0.479,0.208 10 false ON 1.802,4.677 2.281,4.885 0.479,0.208 10 false OFF 1.802,4.26 2.281,4.469 0.479,0.208 10 false ON 1.781,3.917 2.26,4.125 0.479,0.208 10 false OFF 1.781,3.5 2.26,3.708 0.479,0.208 10 false ON 1.594,2.969 2.156,3.198 0.563,0.229 10 false Release 1.74,2.344 2.219,2.552 0.479,0.208 10 false Close 1.781,1.854 2.26,2.063 0.479,0.208 10 false OFF 1.802,1.417 2.281,1.625 0.479,0.208 10 false ON 1.802,1.031 2.281,1.24 0.479,0.208 10 false OFF 1.854,0.438 2.333,0.646 0.479,0.208 10 false ON 3.448,1.156 5.302,1.458 1.854,0.302 10 false Approximately 0.8 Seconds 3.229,2.021 5.083,2.323 1.854,0.302 10 false Approximately 1.0 Second 1.865,5.75 2.344,5.958 0.479,0.208 10 false ON 2.698,6.875 2.854,7.073 0.156,0.198 10 false * 3,6.875 3.156,7.073 0.156,0.198 10 false * 0.115,8.479 3.469,8.854 3.354,0.375 10 false *: Models with Power Back Door Hazard Warning Light




FUNCTION


a.

The power back door system has the following functions:

Function Outline

*: Models with wireless one motion function

Opener Function
·

Upon receiving an on signal from the power back door control switch or the back door opener switch assembly with the back door unlocked, the power back door ECU (multiplex network door ECU) actuates the back door closer motor and the power back door unit assembly set in order to release the latch of the back door and open the back door.


Closer Function
·

Upon receiving an on signal from the power back door control switch, the No. 1 power back door control switch or the power back door button on the electrical key transmitter sub-assembly with the back door open, the power back door ECU (multiplex network door ECU) actuates the power back door unit assembly set and the back door closer motor in order to close the back door and engage the latch of the back door lock.


Jam Protection Function Upon receiving signals from a touch sensor or the Hall ICs of the power back door unit assembly set, when the power back door ECU detects that an object is jammed in the back door, the door operation is stopped after moving back a certain distance upward during the closing operation and suspended during the opening operation. The power back door buzzer sounds twice when a jammed object is detected.
Back Door Open/Close Speed Control Function In accordance with the signals received from the Hall ICs, the power back door ECU performs control the opening and closing speeds of the back door.
Suspending Control Function By conducting any of the following operations during the opening or closing operation of the power back door, the operation will be canceled:
·

The power back door system is turned off.

·

The power back door button on the electrical key transmitter sub-assembly is pressed.

·

The back door control switch is pressed.

·

The back door opener switch assembly is pressed.

·

The power back door control switch is pressed.

·

The No. 1 power back door control switch is pressed.


Memory Function
·

By pressing the No. 1 power back door control switch for 2 seconds while holding the back door at the desired opening angle by hand, the power back door buzzer sounds 4 times as an answer back and the power back door ECU memorizes the angle. From the next time the back door is opened, the back door will stop at the set angle.

·

By pressing the No. 1 power back door control switch for 7 seconds after the set angle is memorized, the memorized position is initialized.


Assist Function When the back door is stopped and then manually operated in the closing direction, the power back door ECU drives the power back door unit assembly set to operate the back door until it is fully closed.
Customization Function By using the multi-information display, the following items can be customized.
·

Opening angle of the back door.

·

On/Off setting of the power back door system.

·

Volume of the power back door warning buzzer.


Switch Operation Function When each operation switch is operated, the following operations are performed in accordance with the back door condition:
·

When the power back door control switch or the power back door button on the electrical key transmitter sub-assembly is pressed, opening the operation is performed when the back door is closed and the closing operation is performed when the back door is open.

·

When the back door opener switch assembly is pressed, the opening operation of the back door is performed.

·

When the No. 1 power back door control switch is pressed, the closing operation of the back door is performed.


Wireless One Motion Function*
·

When the power back door button on the electrical key transmitter sub-assembly is pressed with the back door locked, the back door is unlocked and opened.

·

Although this function is disabled by default, the function can be set via the customization function. For details, refer to the Repair Manual.



HINT:

If the power supply is stopped such as when the cable is disconnected from the negative (-) terminal, initialization is required. The back door should be fully closed when performing initialization.