Home › Vehicle Exterior › MIRROR (EXT) › MIRROR SYSTEM
NM37A0E _59 Vehicle Exterior _088217 MIRROR (EXT) _0420775 MIRROR SYSTEM CO CONTROL F

MIRROR (EXT)  MIRROR SYSTEM  CONTROL  MIRROR CONTROL  


FUNCTION OF MAIN COMPONENTS


Models without Memory System
Component Function
Outer Rear View Mirror Assembly RH/LH Moves the mirror surface of the outer rear view mirror assembly LH/RH based on the mirror surface operation signal output by the outer mirror switch assembly.
Outer Mirror Switch Assembly Mirror Adjust Switch Outputs a mirror surface operation signal to the outer rear view mirror assembly LH/RH.
Mirror Select Switch Selects the outer rear view mirror assembly whose mirror surface angle is to be adjusted.
Mirror Retract Switch Outputs the selected auto/retract/return signal to the main body ECU (multiplex network body ECU).
Main Body ECU (Multiplex Network Body ECU) Outputs the automatic retractable function operation signal to the MIR MTR NO. 1 relay and MIR MTR NO. 2 relay.
No. 2 Engine Room Relay Block and No. 2 Junction Block Assembly
- MIR MTR NO. 1 Relay
- MIR MTR NO. 2 Relay
Supplies power to the retraction/restoration motor of the outer rear view mirror assembly LH/RH according to the request from the main body ECU (multiplex network body ECU).

Models with Memory System
Component Function

*1: HV Models

*2: Gasoline Models

Outer Rear View Mirror Assembly RH/LH
·

Moves the mirror surface of the outer rear view mirror assembly LH/RH based on the mirror surface operation signal output by the outer mirror switch assembly.

·

Retraction or restoration the outer rear view mirror assembly LH/RH based on the operation signal output by the outer mirror switch assembly.


Outer Mirror Switch Assembly Mirror Adjust Switch Outputs the mirror surface angle adjustment signal to the main body ECU (multiplex network body ECU).
Mirror Select Switch Selects the outer rear view mirror assembly whose mirror surface angle is to be adjusted.
Mirror Retract Switch Outputs the selected auto/retract/return signal to the main body ECU (multiplex network body ECU).
Outer Mirror Control ECU Assembly LH/RH
·

Outputs the mirror surface operation signal from the main body ECU (multiplex network body ECU) to the outer rear view mirror assembly LH/RH.

·

Outputs the memory switch signal to the main body ECU (multiplex network body ECU).

·

The mirror surface is memorized according to the instruction of the main body ECU (multiplex network body ECU).


Door Unlock Detection Switch Detects whether a door is locked or unlocked and transmits a signal to the main body ECU (multiplex network body ECU).
Seat Memory Switch Outputs the switch operation signal to the outer mirror control ECU assembly LH.
Hybrid Vehicle Control ECU*1 Transmits the shift position signals to the main body ECU (multiplex network body ECU).
ECM*2
Main Body ECU (Multiplex Network Body ECU)
·

Outputs the switch signal received from the outer mirror switch assembly to the mirror control ECU assembly LH/RH.

·

Outputs a mirror surface operation signal to the outer mirror control ECU assembly LH/RH when a reverse (R) signal is received.




SYSTEM CONTROL


a.

Reverse Shift-linked Function (Models with Reverse Shift-linked Function)

i.

This function operates when all of the following conditions are met:

·

Ignition switch ON.

·

Enter the R or L position of the mirror select switch has been selected.

·

The shift lever is moved to R.




b.

Memory System (Models with Memory System)

i.

The mirror surface position memory function operates when any of the following conditions is met:

·

The seat memory switch is operated with the ignition switch ON, the shift lever in P and the mirror position stored in the memory system.

·

The seat memory switch is operated within approximately 180 seconds of opening the driver door with the ignition switch off and the mirror position stored in the memory system.

·

The seat memory switch is operated within approximately 60 seconds of closing the driver door with the ignition switch off and the mirror position stored in the memory system.

·

With the ignition switch off, the driver door closed and the key ID registration of the memory call function complete, the doors are unlocked using the entry and start system or wireless door unlock function and then the driver door is opened.





FUNCTION


a.

Outer Rear View Mirror Control

i.

The outer rear view mirrors have the following functions:

System Outline

*1: w/ Reverse Shift-linked Function

*2: w/ Memory

Electric Remote Control System Remote Control Function The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch assembly.
Manual Retractable Function This function retracts and returns the outer rear view mirrors when the mirror retract switch (outer mirror switch assembly) is operated.
Automatic Retractable Function This function automatically synchronizes retracting and returning the outside rear view mirrors with locking and unlocking the doors using the entry function, wireless function or key-linked function.
Reverse Shift-linked Function*1
·

This function tilts the mirror surface downward to improve visibility when reversing.

·

If the mirror surface is adjusted via the outer mirror switch assembly while the reverse-linked function is operating, the new mirror position is stored as the default reverse-linked mirror position.


Memory System*2 The memory system can store the driver seat, outer rear view mirror and tilt and telescopic steering positions. Up to 3 memory positions can be stored in the system memory and recalled.



b.

Memory System (w/ Memory)

i.

The memory function works in combination with the following systems, ensuring usability and enabling easy entering or exiting of the vehicle.

System Outline
Power Seat Control System with Memory Function The position control ECU assembly memorizes the seat position and recalls them when all conditions are met.