FUNCTION
The television display assembly consists of a display (LCD panel) and display driver (which is integrated into the RSE ECU).
The main body of the television display assembly has a disc slot, SD card slot and eject button.
The installation location of the television display assembly is the center of the roof headlining.
A 9-inch type WVGA (800 x 480) IPS (In Plane Switching) LCD monitor is used for the display, making it possible to enjoy a high resolution image when viewing from any angle.
By using a free-stop tilt mechanism which enables the screen to be set within the tilt range (90 to 120°), the occupants can set the optimal viewing angle.
The television display assembly has a built-in receiver which communicates with the television switch and volume assembly. It also has a built-in sender for wireless headphones. The angle of the television display assembly can adjusted so that a good view of the monitor can be maintained.
| *1 | Television Display Assembly | - | - |
| *a | Tilt Range | *b | Eject Button |
| *c | SD Card Slot | *d | Disc Slot |