Home › Vehicle Interior › SEAT › POWER SEAT CONTROL SYSTEM › 2020.02–2021.10
NM37A0E _58 Vehicle Interior _088268 SEAT _0420945 POWER SEAT CONTROL SYSTEM CO CONTROL F

SEAT  POWER SEAT CONTROL SYSTEM  CONTROL  SEAT CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the front seat control system have the following functions:

Models without Position Memory Function
Component Outline

*1: Models with 8-way power seat

*2: Models with lumbar support

Front Power Seat Switch Assembly (Driver Seat/Front Passenger Seat) Operates the motors of driver/front passenger seat.
Front Seat Cushion Spring Sub-assembly (Driver Seat/Front Passenger Seat)
·

Slide Motor

·

Front Vertical Motor*1

·

Seat Lifter Motor*1


Operates the motors in accordance with the signals from the front power seat switch.
Separate Type Front Seatback Spring Assembly (Driver Seat/Front Passenger Seat)
·

Reclining Motor

·

Lumbar Support Motor*2


Operates the motors in accordance with the signals from the front power seat switch.

Models with Position Memory Function
Component Outline

*1: Gasoline Models

*2: HV Models

Front Power Seat Switch Assembly (Driver Seat) Front power seat switch assembly (driver seat) sends motor operation signal to the position control ECU assembly (driver seat).
Seat Memory Switch (Driver Side) Seat memory switch (driver side) sends position memory function signals to the outer mirror control ECU assembly (driver side).
Position Control ECU Assembly (Driver Seat)
·

Operates the motors in accordance with the signals from the front power seat switch assembly (driver seat).

·

Registers and recalls seat positions in accordance with the operation of the seat memory switch (driver side).

·

Operates the automatic away/return functions.


Outer Mirror Control ECU Assembly (Driver Side) The outer mirror control ECU assembly (driver side) sends seat memory switch operating signals to the position control ECU assembly (driver seat).
Main Body ECU (Multiplex Network Body ECU)
·

Main body ECU (multiplex network body ECU) sends the automatic away/return function signals to the position control ECU assembly (driver seat).

·

Receives the driver seat condition signals from the position control ECU assembly (driver seat).


Front Door Courtesy Light Switch Assembly (Driver Door) Detects the opening and closing of the driver door and sends signals to the main body ECU (multiplex network body ECU).
Certification ECU (Smart Key ECU Assembly) Sends smart memory call recall command signals to the position control ECU assembly (driver seat) via CAN communication.
ECM*1 The ECM send shift position signal to the position control ECU assembly (driver seat).
Hybrid Vehicle Control ECU*2 The hybrid vehicle control ECU send shift position signal to the position control ECU assembly (driver seat).
Front Seat Cushion Spring Sub-assembly (Driver Seat)
·

Slide Motor

·

Front Vertical Motor

·

Seat Lifter Motor


Operates the motors in accordance with the signals from the front power seat switch assembly (driver seat).
Separate Type Front Seatback Spring Assembly (Driver Seat)
·

Reclining Motor

·

Lumbar Support Motor


Operates the motors in accordance with the signals from the front power seat switch assembly (driver seat).



SYSTEM CONTROL


a.

Power Seat Control System

i.

The power seat control system has the following functions:

System Outline

*1: Models with 8-way power seat

*2: Models with lumbar support

Manual Control The user can perform seat slide, seat reclining, front vertical*1, seat lifter*1, and lumbar support*2 adjustments by operating the front power seat switch assembly.



b.

Position Memory Function

i.

The position memory has the following functions:

Function Outline
Memory The position memory function can memorize 2 different seat positions.
Recall The recall function can recall 2 different memorized seat positions.
Memory Call The memory call function, which utilizes the key IDs, is used to memorize and recall the optimal driving position for a person possessing the electrical key transmitter sub-assembly.


ii.

The position memory function works in combination with the following systems, ensuring usability and enabling easy entering or exiting of the vehicle.

System Outline
Outside Rear View Mirror System The outer mirror control ECUs memorize the outside rear view mirror positions and recalls them when all conditions are met.
Headup Display System The meter mirror ECU memorizes the headup display position and recalls it when all conditions are met.


iii.

The position memory function operating conditions are as follows:

Function Condition Operation
Memory Either of the following conditions is met while the ignition switch is ON:
·

Button 1 or 2 (seat memory switch) is pushed within 2 seconds after the "SET" button is pushed.


·

Stores the seat position.

·

When the memory setting is completed, the buzzer sounds for 0.5 seconds.


Recall
·

Button 1 or 2 (seat memory switch) is pushed within 180 seconds after the driver door has been opened while the ignition switch is off.

·

Button 1 or 2 (seat memory switch) is pushed.


·

The seat position that was memorized in the position control ECU assembly (driver seat) is recalled.

·

The buzzer sounds for 0.1 seconds once the stored seat position is reproduced.


·

Ignition switch is ON.

·

Shift position is in P.

·

Button 1 or 2 (seat memory switch) is pushed.


Button 1 or 2 (seat memory switch) is pushed within 60 seconds after the engine switch has been turned off and the driver door has been closed.
Memory Call
·

A key ID is registered to button 1 or 2 (seat memory switch).

·

Ignition switch is off.

·

The inside of the outside door handle is touched or the electrical key transmitter sub-assembly unlock button is pushed to unlock, and then the driver door is opened.


·

The seat position that was memorized in the position control ECU assembly (driver seat) is recalled.

·

The buzzer sounds for 0.1 seconds once the stored seat position is reproduced.






FUNCTION


a.

Seat Position Detection Method

i.

Power Seats with Position Memory Function

1.

The Hall IC installed on the power seat motor generates pulses corresponding to the speed of the motor. These pulses are then picked up by the position control ECU assembly in order to detect the seat position.

Y103923C03
1.74,1.448 1.74,0.677 1.74,0.677 1.313,0.677 true 2.938,1.208 2.938,0.333 2.938,0.333 3.302,0.333 true 6.25,2.594 5.406,2.594 true 1.635,2.594 0.792,2.594 true 6.292,2.458 6.531,2.677 0.24,0.219 10 false *2 0.594,2.49 0.823,2.781 0.229,0.292 10 false *1 3.344,0.219 3.573,0.438 0.229,0.219 10 false *a 1.115,0.573 1.354,0.792 0.24,0.219 10 false *3
*1 Power Seat Motor *2 Position Control ECU Assembly
*3 Hall IC - -
*a Current Pulsation Generated by Motor - -






DIAGNOSIS


a.

The position control ECU assembly has a diagnosis function. It stores a record of any power seat control system malfunctions in its memory in the form of Diagnostic Trouble Codes (DTCs).


b.

The position control ECU assembly outputs malfunction data and 5-digit DTCs to the Global TechStream (GTS).


c.

The 5-digit DTCs can be read by connecting the GTS to the DLC3. For details, refer to the Repair Manual.