CONSTRUCTION
The No. 1 clearance warning buzzer is installed in the instrument panel. This sound pattern of the buzzer changes when a stationary object is detected in front of the vehicle to notify the driver of the approximate distance of the object from the vehicle.
The No. 2 clearance warning buzzer is installed on the rear inside the vehicle. This sound pattern of the buzzer changes when a stationary object is detected behind the vehicle to notify the driver of the approximate distance of the object from the vehicle.
Sounding of the No. 1 and No. 2 clearance warning buzzers is controlled by the clearance warning ECU assembly.
| Item | Specification | |
|---|---|---|
| No. 1 Clearance Warning Buzzer | Operation Frequency [kHz] | 2.4 +/- 0.04 |
| Sound Pressure Level [dB]* | 80 +/- 6 | |
| No. 2 Clearance Warning Buzzer | Operation Frequency [kHz] | 2.0 +/- 0.04 |
| Sound Pressure Level [dB]* | 91 +/- 6 | |
*: This is the sound pressure level at a position 1 m (3.3 ft.) away from the buzzer itself, not the level where the driver would be sitting (where the sound would actually be heard).
OPERATION
Clearance Warning Buzzer Sounding (Models with Parking Support Brake System)
If a stationary object is detected at longest range, long-range or medium-range, the buzzer sounding interval changes approximately every 100 mm (3.94 in.) according to the distance from the object, and the clearance warning buzzer sounds.
If a stationary object is detected at short-range or shortest range, the clearance warning buzzer sounds continuously.
If both a front sensor and rear sensor detect a stationary object at the same time, both the No. 1 and No. 2 clearance warning buzzers sound independently (based on the front detection distance for No. 1 and the rear detection distance for No. 2).
Clearance Warning Buzzer Sounding (Models without Parking Support Brake System)
Depending on the detection distance and the detection area, the sound pattern of the No. 1 clearance warning buzzer or No. 2 clearance warning buzzer will vary.
| Detection Area | Detection Distance [mm (in.)] | Buzzer Sound Pattern | ||
|---|---|---|---|---|
| On
[ms] |
Off
[ms] |
|||
| Front Corner | Long-range | 600 (23.6) to 450 (17.7) | 200 | 200 |
| Medium-range | 450 (17.7) to 300 (11.8) | 100 | 100 | |
| Short-range | 300 (11.8) to 150 (5.91) | Continuous Sound | 0 | |
| Shortest Range | 150 (5.91) or less | |||
| Front Center | Longest Range | 1000 (39.4) to 600 (23.6) | 200 | 500 |
| Long-range | 600 (23.6) to 450 (17.7) | 200 | 200 | |
| Medium-range | 450 (17.7) to 300 (11.8) | 100 | 100 | |
| Short-range | 300 (11.8) to 150 (5.91) | Continuous Sound | 0 | |
| Shortest Range | 150 (5.91) or less | |||
| Rear Corner | Long-range | 600 (23.6) to 450 (17.7) | 200 | 200 |
| Medium-range | 450 (17.7) to 300 (11.8) | 100 | 100 | |
| Short-range | 300 (11.8) to 150 (5.91) | Continuous Sound | 0 | |
| Shortest Range | 150 (5.91) or less | |||
| Rear Center | Longest Range | 1500 (59.1) to 600 (23.6) | 200 | 500 |
| Long-range | 600 (23.6) to 450 (17.7) | 200 | 200 | |
| Medium-range | 450 (17.7) to 300 (11.8) | 100 | 100 | |
| Short-range | 300 (11.8) to 150 (5.91) | Continuous Sound | 0 | |
| Shortest Range | 150 (5.91) or less | |||
If both a front sensor and rear sensor detect an object at the same time, both the No. 1 and No. 2 clearance warning buzzers sound independently (based on the front detection distance for No. 1 and the rear detection distance for No. 2).
When a sensor malfunction is detected or a sensor is frozen or dirty, the buzzer sounds 5 times according to the following timing: