Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM (for HV Model) › from 2020.11
NM37A0E _54 Brake _086687 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0418462 BRAKE CONTROL SYSTEM(for HV Model) GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM(for HV Model)  GENERAL  GENERAL  


OUTLINE


a.

The following brake control systems are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), Brake Assist, Traction Control (TRC), Vehicle Stability Control (VSC), Trailer Sway Control, Active Cornering Assist (ACA), Trail Mode*1, Hill-start Assist Control, Brake Hold, VSC and Cooperative Control with EPS*2 or VSC+*3, Emergency Brake Signal and Secondary Collision Brake*4.

*1: 4WD/AWD models

*2: Models for General countries

*3: Models for Europe

*4: Models with pre-collision system


b.

Vehicle Dynamics Integrated Management (VDIM) is used.



MAIN FEATURES


a.

Electronically Controlled Brake System

i.

The electronically controlled brake system uses sensors to detect the amount of brake pedal depression. Based on this, the No. 1 skid control ECU (brake booster with master cylinder assembly) and No. 2 skid control ECU (brake actuator assembly) calculate the braking force and the brake booster with master cylinder assembly, brake booster with accumulator pump assembly and brake actuator assembly control the brake fluid pressure of the 4 wheels.


ii.

The electronically controlled brake system cooperates with the hybrid system to optimally control the brake fluid pressure and regenerative braking. This enhances the efficiency of energy regeneration and improves fuel economy.


iii.

When the system is malfunctioning, brake control continues via the use of non-malfunctioning parts. Also, when the system is not operating, the brake fluid pressure generated in the brake master cylinder by the depression of the brake pedal works as a back-up mechanism to ensure braking force.

Control Outline
X144245E01
0.896,7.063 5.177,7.26 4.281,0.198 10 false : Control Signal Flow 0.865,7.438 4.99,7.635 4.125,0.198 10 false : Brake Fluid Pressure Flow 6.292,7.052 6.906,7.302 0.615,0.25 10 false Wheel 0.177,0.604 1.927,1.135 1.75,0.531 10 false Brake Booster with Accumulator Pump Assembly 0.156,1.24 1.615,1.625 1.458,0.385 10 false - Maintains brake fluid pressure for control 2.396,0.375 3.167,0.573 0.771,0.198 10 false [Input] 2.448,0.146 6.573,0.344 4.125,0.198 10 false Brake Booster with Master Cylinder Assembly 2.417,0.604 4.865,0.802 2.448,0.198 10 false - Generates brake pedal feel 2.406,0.833 5.24,1.021 2.833,0.188 10 false - Detects brake pedal depression amount 2.427,1.083 3.198,1.281 0.771,0.198 10 false [Output] 2.417,1.323 6.094,1.542 3.677,0.219 10 false - Supplies regulated brake fluid pressure to master cylinder 2.427,1.573 4.719,1.771 2.292,0.198 10 false [Brake Fluid Pressure Control] 2.427,1.823 5.938,2.083 3.51,0.26 10 false - Adjusts brake fluid pressure in back of master cylinder 2.417,2.083 4.521,2.281 2.104,0.198 10 false [No. 1 Skid Control ECU] 2.417,2.354 5.24,2.521 2.823,0.167 10 false - Detects brake pedal depression amount 1.5,4.25 4.333,4.448 2.833,0.198 10 false - Detects brake pedal depression amount 2.417,2.635 5.75,2.875 3.333,0.24 10 false - Regulates master cylinder brake fluid pressure 2.417,2.896 6.146,3.271 3.729,0.375 10 false - Drives pump motor of brake booster with accumulator pump assembly 1.479,3.729 5.604,3.927 4.125,0.198 10 false Brake Actuator Assembly 1.51,3.99 2.281,4.188 0.771,0.198 10 false [Input] 1.5,4.521 4.26,4.698 2.76,0.177 10 false [Brake fluid pressure regulation / Output] 1.51,4.792 5.802,5.156 4.292,0.365 10 false - Supplies brake fluid from the master cylinder or reservoir via the pump motor 1.51,5.25 5.552,5.469 4.042,0.219 10 false - Controls brake fluid pressure of each wheel via solenoid valves 1.51,5.521 3.271,5.719 1.76,0.198 10 false [No. 2 Skid Control ECU] 1.51,5.781 4.25,5.958 2.74,0.177 10 false - Detects brake pedal depression amount 1.51,6.063 5.083,6.51 3.573,0.448 10 false - Controls brake fluid pressure of each wheel during service braking, cooperative braking, ABS, VSC, etc. 1.5,6.563 4.104,6.76 2.604,0.198 10 false - Drives pump motor and solenoid valves


iv.

Brake control apportions brake force to the hydraulic brake system and regenerative brake system at varying vehicle speeds as follows.

X131270E01
3.323,0.042 5.219,0.573 1.896,0.531 10 false Braking Force Based on Brake Pedal Depression by Driver 1.313,1.688 1.823,2.115 0.51,0.427 10 false Braking Force 1.458,3.26 2.583,3.5 1.125,0.24 10 false Start of Braking 5.094,3.26 6.219,3.5 1.125,0.24 10 false Stop 2.719,3.406 4.875,3.635 2.156,0.229 10 false Example of Cooperative Control 3.635,2.271 5.104,2.646 1.469,0.375 10 true Braking Force by Motor (Energy Regeneration) 2.99,1.271 4.094,1.781 1.104,0.51 10 false Hydraulic Braking Force

X131271E06
2.094,0.573 2.313,0.573 2.313,0.573 2.583,0.948 false 5.542,0.604 5.76,0.604 5.76,0.604 6.031,0.979 false 2,3.948 2.219,3.948 2.219,3.948 2.49,4.323 false 4.667,4.125 5.958,4.365 1.292,0.24 10 false Hydraulic Brake 4.667,4.635 5.958,4.875 1.292,0.24 10 false Motor Brake 0.438,0.708 0.802,0.958 0.365,0.25 10 false High 3.969,0.708 4.333,0.958 0.365,0.25 10 false High 0.438,3.99 0.802,4.24 0.365,0.25 10 false High 0.344,1.26 0.844,1.698 0.5,0.438 10 false Braking Force 3.865,1.219 4.365,1.656 0.5,0.438 10 false Braking Force 0.333,4.594 0.833,5.031 0.5,0.438 10 false Braking Force 1.25,2.219 2.521,2.594 1.271,0.375 10 false Depression Force of Brake Pedal 4.771,2.229 6.042,2.604 1.271,0.375 10 false Depression Force of Brake Pedal 1.292,5.552 2.563,5.927 1.271,0.375 10 false Depression Force of Brake Pedal 2.781,2.292 3.146,2.542 0.365,0.25 10 false High 6.313,2.302 6.677,2.552 0.365,0.25 10 false High 2.781,5.625 3.146,5.875 0.365,0.25 10 false High 1.76,5 3.031,5.375 1.271,0.375 10 false Hydraulic Brake 2.021,1.469 3.292,1.844 1.271,0.375 10 false Hydraulic Brake 5.896,1.26 7.021,1.531 1.125,0.271 10 false Hydraulic Brake 1.219,0.448 2.052,0.938 0.833,0.49 10 false Total Braking Force 4.667,0.51 5.5,1 0.833,0.49 10 false Total Braking Force 1.125,3.854 1.958,4.344 0.833,0.49 10 false Total Braking Force 1.375,3.104 2.646,3.479 1.271,0.375 10 false At high speeds 4.625,3.104 6.188,3.448 1.563,0.344 10 false At mid or low speeds 0.552,6.5 3.74,6.917 3.188,0.417 10 false When shift position is in N or at low speeds 1.229,7.229 6.427,7.531 5.198,0.302 10 false Brake force by hydraulic and regenerative brake system at different vehicle speeds



b.

Vehicle Dynamics Integrated Management (VDIM)

i.

In contrast to the ABS, TRC and VSC functions that were controlled individually in the conventional brake control system, the VDIM manages these functions in the form of an integrated system.


ii.

Furthermore, the VDIM effects cooperative control together with the Electric Power Steering (EPS) system in order to improve the dynamic performance of the vehicle to "run, turn, and stop".

X107068E05
4.792,4.01 5.448,4.01 true 4.604,1.083 5.479,1.083 true 2.927,5.271 4.26,5.625 1.333,0.354 10 false Models without VDIM 5.51,4.375 7.052,5.448 1.542,1.073 10 false - Each function has its own control area and is operated independently 5.49,3.938 6.958,4.25 1.469,0.313 10 false Vehicle Control Areas 1.823,4.792 2.885,5.167 1.063,0.375 10 false Braking 1.708,3.115 2.771,3.49 1.063,0.375 10 false Cornering 4.792,4.75 5.854,5.125 1.063,0.375 10 false Cornering 4.885,3.115 5.948,3.49 1.063,0.375 10 false Accelerating 5.51,1.385 7.052,2.375 1.542,0.99 10 false - All functions are operated seamlessly in unison with each other 1.844,2.104 2.906,2.479 1.063,0.375 10 false Braking 1.667,0.542 2.729,0.917 1.063,0.375 10 false Cornering 4.854,2.073 5.917,2.448 1.063,0.375 10 false Cornering 4.844,0.542 5.906,0.917 1.063,0.375 10 false Accelerating 5.51,1.01 6.979,1.323 1.469,0.313 10 false Vehicle Control Areas 0.083,0.063 3.896,0.438 3.813,0.375 10 false Conceptual Diagram of Control Management: 3.021,2.438 4.844,2.813 1.823,0.375 10 false Models with VDIM




PRECAUTION


a.

ABS

i.

The ABS system cannot increase the performance limit of the tires. Always drive safely and be aware of the vehicle speed and distance to other vehicles.


ii.

Any non-standard components such as non-standard tires that are installed may have a negative effect on the ABS function.


iii.

When braking using ABS, the braking distance may be longer than vehicles without ABS in the following conditions:

·

When driving on a dirt road or a road covered with fresh snow

·

When using tire chains

·

When driving over a joint in the road surface

·

When driving on a rough road such as an unpaved or stone-paved road




b.

Brake Assist

i.

Brake assist cannot increase the performance limit of the fundamental brake system. Always drive safely and be aware of the vehicle speed and distance to other vehicles.



c.

TRC, VSC

i.

The TRC and VSC systems ensure traction and vehicle stability. Do not disable the TRC or VSC functions unless necessary.


ii.

The TRC and VSC systems cannot increase the performance limit of the tires. Always drive the vehicle carefully in conditions in which drive wheel traction or vehicle stability may be lost.



d.

Active Cornering Assist (ACA)

i.

Active Cornering Assist (ACA) cannot increase the performance limit or innate maneuverability of the vehicle itself.


ii.

Do not overly rely on Active Cornering Assist (ACA). Active Cornering Assist (ACA) may not operate effectively when accelerating down slopes or driving on slippery road surfaces.


iii.

When Active Cornering Assist (ACA) frequently operates, Active Cornering Assist (ACA) may temporarily stop operating to ensure proper operation of the brakes, TRC and VSC.



e.

Trail Mode

i.

Trail Mode is not intended to expand the limits of the vehicle. Thoroughly check the road conditions and drive with caution.


ii.

Trail Mode may not be effective enough depending on the road conditions (pitch, slipperiness and undulations). Thoroughly check the road conditions before driving.


iii.

Trail Mode controls the vehicle so that the drive force can be maximized to improve driveability on rough roads. Therefore, the fuel economy will not be as efficient as when driving without Trail Mode.


iv.

Only use Trail Mode when driving on rough roads, and turn Trail Mode off at all other times.



f.

Hill-start Assist Control

i.

Hill-start assist control is not intended to keep the vehicle stationary on a hill for a prolonged period. As hill-start assist control only prevents the vehicle from rolling backwards for 2 seconds after the brake pedal is released, perform start-off within this period.


ii.

When hill-start assist control is operating and the ignition switch is turned off, hill-start assist control will be canceled without warning.


iii.

Hill-start assist control prevents the vehicle from rolling backwards by controlling the brake force to the 4 wheels. However, the vehicle may not remain stationary when on an extremely steep slope or a low friction surface such as ice.



g.

Brake Hold

i.

Brake hold is not intended to keep the vehicle parked for a prolonged period, such as the parking brake is designed to do.


ii.

When brake hold is operating and the ignition switch (push start switch) is turned off, brake hold will be canceled without warning.


iii.

If brake hold does not operate even though the vehicle is stopped, firmly depress the brake pedal. If brake hold still does not operate, check the operating conditions.


iv.

It may not be possible for brake hold to keep the vehicle stationary on a steep or slippery road.